Most common failures | No# failures |
---|
Headlamp aim out of alignment | 38 |
Registration plate lamp issues | 25 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Rear reflector on motorcycle missing |1.4.1| | 20 |
Rear reflector missing (4.8.2 (a) (ii)) | 16 |
Rear reflector missing |4.8.2 |a| |ii|| | 14 |
Registration plate issues | 11 |
Drive chain excessively loose |6.2.1d| | 11 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 8 |
Drive chain worn to excess |6.2.1e| | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 7 |
Front Position lamp not working (4.2.1 (a)) | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 5 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 5 |
Drive chain worn to excess (6.1.7 (c) (i)) | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 5 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 5 |
Front Position lamp not working |4.2.1 |a|| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 4 |
Offside Rear Footrest missing (6.2.12 (a)) | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Footrest missing (6.2.12 (a)) | 4 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 4 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
Headlamp insecure (4.1.1 (c)) | 3 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Nearside Rear Footrest missing (6.2.12 (a)) | 3 |
Drive chain excessively tight (6.1.7 (k) (i)) | 3 |
Front Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 3 |
Drive chain sprocket worn to excess |6.2.1e| | 3 |
Brake hose excessively deteriorated | 3 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Throttle operating incorrectly |6.2.1f| | 2 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 2 |
Indicator switch insecure |1.5.4| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
Brake pedal insecure (1.1.2 (e) (i)) | 2 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 2 |
Horn not working (7.7 (a)) | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 2 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 2 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Nearside Rear Footrest missing |6.2.12 |a|| | 2 |
Offside Rear Footrest missing |6.2.12 |a|| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Pillion seat insecure (6.2.6 (a) (ii)) | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Front Horn not working (7.7 (a) (ii)) | 2 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Lower Suspension arm ball joint excessively worn front swinging arm bushes (5.3.4 (a) (i)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Fuel system component leaking carburetter area (6.1.3 (b) (i)) | 1 |
Rear suspension bush has excessive free play swing arm |2.4.A2a|i|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Stop lamp not working Off foot pedal |4.3.1 |a| |ii|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Upper Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Brake lever has inadequate reserve travel damaged |3.1.3b| | 1 |
Exhaust is leaking and excessively noisey Bolt missing |7.1.1b| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
Rear Wheel hub excessively worn (5.2.1 (b) (i)) | 1 |
Steering operation restricted in free movement from lock to lock head bearings worn |2.1.4 |c|| | 1 |
Rear Footrest missing rear footrests missing |6.2.12 |a|| | 1 |
Drive chain worn to excess chain worn and has major tight spots |6.1.7 |c| |i|| | 1 |
Stop lamp missing stop lamp not working off rear brake pedal |4.3.1 |a| |ii|| | 1 |
Rear Footrest missing Pillion footrests missing. |6.2.1a| | 1 |
Handlebar deformed Handle bars bent r/h side. |2.1.1b| | 1 |
Brake pedal pivot excessively tight |1.1.1 |a|| | 1 |
Brake pedal is bent and the brake cannot be readily applied |1.1.2 |d|| | 1 |
Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
Rear Drive chain sprocket excessively loose bolts loose (6.1.7 (c) (i)) | 1 |
Drive chain worn to excess links seized in number of places and locking up (6.1.7 (c) (i)) | 1 |
Brake pedal pivot excessively worn + parshaly seized (1.1.1 (b)) | 1 |
Stop lamp not working from rear control (4.3.1 (a) (ii)) | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Central Front Steering headbearing has excessive free play |2.2.2| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride no split pin in brake anchor |6.2.1h| | 1 |
Front Valve stem seriously misaligned leaking (5.2.3 (j)) | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Top yoke securing bolt is un done. |6.2.1h| | 1 |
Nearside Rear Footrest insecure Bracket is broken. |6.2.1a| | 1 |
Stop lamp not working with rear lever (4.3.1 (a) (ii)) | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Rear Stop lamp not working Rear brake light switch not working (4.3.1 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Horn not working |1.7.3a| | 1 |
Central Front Steering headbearing has excessive wear or free play Excessive free play (2.2.2 (f) (i)) | 1 |
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Steering operation restricted in free movement from lock to lock Head bearings very tight |2.1.4 |c|| | 1 |
Central Rear Suspension arm attachment bracket/mounting insecure EXCESSIVE PLAY SWINGING ARM (5.3.3 (a) (i)) | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Motorcycle structure excessively distorted frame engine and swinging arm distorting when under load |6.1.1a| | 1 |
Rear Brake component insecure (1.1.21 (c)) | 1 |
Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Brake lever cannot be applied smoothly lever action not smooth lever judders on application |3.1.3d| | 1 |
Nearside Rear Direction indicator not working indicator worked then stopped |led| poss.poor connection |1.5.1c| | 1 |
Rear Footrest missing passenger footpegs not fitted |6.2.1a| | 1 |
Front Upper Front suspension assembly component loose |2.3.1| | 1 |
Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Footrest insecure pillion footrests insecure (6.2.12 (a)) | 1 |
Rear Stop lamp not working on rear foot brake (4.3.1 (a) (ii)) | 1 |
Front Headlamp aim not tested |4.1.2 |b|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Lower Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear suspension bush has excessive free play rear swinging arm |2.4.A2a|i|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Drive chain sprocket worn to excess front and rear |6.2.1e| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear suspension bush has excessive free play rear swinging arm and fowling exhaust |2.4.A2a|i|| | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Steering movement excessively stiff with the weight on the lower bearing at full right and left lock |2.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies off rear brake |1.3.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride clip fitted wrong way round on joining link |6.2.1h| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Footrest missing Both (6.2.12 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Valve stem seriously damaged Broken (5.2.3 (j)) | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Motorcycle structure is so deformed it is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
Exhaust excessively deteriorated exhaust emissions EVAP pipe |7.1.1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Stop lamp not working foot control (4.3.1 (a) (ii)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Rear Rear suspension bearing has excessive free play swing arm |2.4.A2a|i|| | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Rear Brake effort inadequate at a wheel Adjusted for/nut (1.2.1 (a) (i)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Stop lamp not working Front brake light switch failed |4.3.1 |a| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Offside Steering operation fouling on the fuel tank or bodywork on full lock stop broken |2.1.4 |b|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Shock absorber has an excessively worn bush BOTH seals (5.3.2 (c)) | 1 |
Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
Headlamp light source and lamp not compatible incorrect color and too bright (4.1.4 (c)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Rear Lower Stop lamp not working pedal (4.3.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Rear Brake pedal pivot excessively tight can not operate (1.1.1 (a)) | 1 |
Front Engine mounting/bracket bracket missing bolts missing (6.1.8 (a) (ii)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up hub bearing (5.1.3 (a) (ii)) | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock left lock (2.1.4 (a)) | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Motorcycle structure excessively distorted headstock twisted |6.1.1a| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Offside Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Nearside Front Brake excessively binding calliper partially seized (1.2.1 (f)) | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear reflector on motorcycle obscured by `L` plate |1.4.2b| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Rear reflector missing obscured by "L" plate |4.8.2 |a| |ii|| | 1 |
Dipswitch does not operate immediately when selected on main beam switch broken |4.1.3 |b|| | 1 |
Stop lamp not working from foot brake |4.3.1 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Brake clevis joint insecure missing split pin tie bar |1.1.15 |c|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake linkage has restricted free movement |1.1.15 |e|| | 1 |
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies Rear Brake Control |1.3.1a| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies foot pedal |1.3.1a| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Exhaust is leaking and excessively noisey front pipe cracked |7.1.1b| | 1 |
Stop lamp not working Rear Footbrake |4.3.1 |a| |ii|| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake pedal cannot be released smoothly |return spring missing| |3.1.3d| | 1 |
Front Shock absorber has a serious fluid leak fork seal bad oil leak (5.3.2 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Brake caliper inadequately mounted (1.1.16 (c) (i)) | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear position lamp deteriorated and function impaired number plate lamp |1.1.1b| | 1 |
Clutch lever positioned so it cannot be readily operated. loose |6.2.1g| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Offside Front Upper Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Direction indicators not working all |1.5.1c| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Brake pedal pivot excessively tight rear brake pedal no movement (1.1.1 (a)) | 1 |
Rear Stop lamp not working when rear brake applied (4.3.1 (a) (ii)) | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Engine mounting/bracket excessively loose ENGINE LOOSE (6.1.8 (a) (ii)) | 1 |
Rear Suspension arm pin or bush excessively worn SWINGING ARM LOOSE (5.3.4 (a) (i)) | 1 |
Rear Rear reflector missing New reflector fitted |4.8.2 |a| |ii|| | 1 |
Rear Footrest missing both (6.2.12 (a)) | 1 |
Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake pedal pivot excessively tight |1.1.1 |a|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Steering movement excessively `notchy` with the wheel raised self centre headbearings |2.2.1b| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride torque arm missing split pin |6.2.1h| | 1 |
Handlebar deformed to the extent that steering is affected left side bent up |2.2.1 |c| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the handling requires adjustment to left |2.4 |a|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Brake pedal insecure (1.1.2 (e) (i)) | 1 |
Offside Front Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking engine to frame mount are loose witch causes the engine to move in frame |6.1.1c| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Drive chain so loose it is likely to fail Can remove chain from sproket (6.1.7 (c) (ii)) | 1 |
Rear Stop lamp switch with a delay in operation Braking before light comes on (4.3.2 (a) (ii)) | 1 |
Nearside Front Direction indicator with a multiple light source more than 1/2 not functioning Over half legs not working (4.4.1 (a) (ii)) | 1 |
Rear Brake back plate insecure Tie arm locking pin missing |1.1.14 |d|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake cylinder operating mechanism has excessive travel (1.1.16 (e) (i)) | 1 |
Rear Brake component modification unsafe (1.1.21 (d) (i)) | 1 |
Stop lamp does not illuminate immediately a brake applies when rear brake applied |1.3.1a| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Rear Suspension component mounting modified so the suspension is likely to fail other components exhaust catching rear arm |5.3.3 |c| |ii|| | 1 |
Nearside Rear Drive chain sprocket excessively loose chain adjuster nut loose |6.1.7 |c| |i|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |