| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 5 |
| Horn not working |7.7 |a| |ii|| | 4 |
| Stop lamp remains on when the brakes are released | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 3 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Front Brake caliper|s| insecure |3.2.A1j| | 2 |
| Riders seat insecure (6.2.5 (a) (ii)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Brake hose excessively deteriorated | 2 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Registration plate issues | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Stop lamp not working rear control (4.3.1 (a) (ii)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Nearside Rear Brake lever has insufficient reserve travel Rear brake lever has reserve travel and hits handlebar grip. (1.1.2 (a)) | 1 |
| Offside Front Brake fluid contaminated (1.8 (a)) | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Front Brake lever has restricted free movement |1.1.15 |e|| | 1 |
| Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Rear Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Front Stop lamp not working off front brake. (4.3.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Brake reaction bracket insecure FRONT BRACKET BUSH worn |3.2.A1j| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
| Fork yoke excessively deformed (2.2.2 (d) (i)) | 1 |
| Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Suspension arm pin or bush excessively worn Suspension Arm Siezed, Causing Suspension To Be Inoperative. (5.3.4 (a) (i)) | 1 |
| Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Front Upper Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Central Front Upper Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Central Front Lower Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Brake lever insecure rear lock nut missing |1.1.2 |e| |i|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Rear Brake effort inadequate at a wheel Rear brake failed to meet minimum requirements (1.2.1 (a) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases Exhaust leaking at cylinder head (6.1.2 (a)) | 1 |
| Offside Rear Exhaust system insecure Exhaust mountings broken at 2 places (6.1.2 (a)) | 1 |
| Offside Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
| Engine mounting/bracket damaged or deteriorated resulting in excessive movement Severe judder from engine when driving (6.1.8 (a) (i)) | 1 |
| Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Front Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Horn control not functioning. |1.7.2b| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment lever insecure nut missing (1.1.15 (f)) | 1 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
| Nearside Brake lever insecure nut missing (1.1.2 (e) (i)) | 1 |
| Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Brake linkage excessively worn (1.1.15 (b)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock broken throttle housing |2.1.4| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp not working from front brake (4.3.1 (a) (ii)) | 1 |
| Offside Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Offside Front Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
| Offside Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Stop lamp not working front and rear (4.3.1 (a) (ii)) | 1 |
| Central Front Brake excessively binding (1.2.1 (f)) | 1 |
| Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Central Rear Brake reaction bracket excessively worn (1.1.15 (b)) | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Upper Rear suspension bush has excessive free play shock |2.4.A2a|i|| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Stop lamp switch with a delay in operation front brake (light stuck on) (4.3.2 (a) (ii)) | 1 |
| Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort needed adjusting up |3.3.A1c| | 1 |