Most common failures | No# failures |
---|
Headlamp aim out of alignment | 31 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Drive chain excessively loose |6.2.1d| | 15 |
Horn not working |1.7.3a| | 14 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 12 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 11 |
Front wheel bearings have excessive free play |2.3.5b| | 11 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Throttle operating incorrectly |6.2.1f| | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Drive chain excessively tight |6.2.1d| | 9 |
Drive chain worn to excess |6.2.1e| | 9 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Registration plate lamp issues | 5 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 5 |
Offside Front Direction indicators not working |1.5.1c| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Rear Position lamp not working |4.2.1 |a|| | 3 |
Front Brake pipe inadequately supported |3.2.B2b| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
Offside Handlebar deformed |2.1.1b| | 3 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 3 |
Nearside Footrest missing |6.2.1a| | 2 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 2 |
Brake hose damaged | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Nearside Handlebar deformed |2.1.1b| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Brake caliper|s| insecure |3.2.A1j| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Direction indicator insecure |1.5.3b| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Front Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 2 |
Front Valve stem seriously damaged |5.2.3 |j|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Registration plate issues | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
Brake hose excessively deteriorated | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear suspension bush has excessive free play swing arm |2.4.A2a|i|| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Front position lamp incorrect colour |1.1.2a| | 2 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
Rear Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Offside Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Central Front All position lamps light intensity significantly reduced machine showing a red light at the front |4.2.3 |a| |ii|| | 1 |
Central Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. LEFT HAND |2.1.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies foot brake |1.3.1a| | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Rear suspension component loose |2.4.A.1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear suspension component loose swinging arm pivot |2.4.A.1a| | 1 |
Offside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Brake caliper inadequately mounted mounting bolt missing (1.1.16 (c) (i)) | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Offside Rear Inner Brake component inadequately mounted pad retaining locking nut missing (1.1.21 (c)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Centre Position lamp switch insecure |1.1.4b| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Offside Front Steering control handlebar movement restricted by trapped cables Front Brake Hose Catching on Fairing |2.1.2c| | 1 |
Rear Footrest missing Rear Footrests Missing |6.2.1a| | 1 |
Offside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear suspension fouling which affects the movement of the rear suspension exhaust hitting swing arm |2.4.A.3a| | 1 |
Nearside Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain adjuster |6.2.1h| | 1 |
Chain guard insecure missing |6.2.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Exhaust mounting missing |7.1.1c| | 1 |
Offside Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Brake locking device insecure rear caliper mounting tabs not folded over. |3.2.A1e| | 1 |
Rear suspension bush has excessive free play swingarm |2.4.A2a|i|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Rear Suspension rod pin or bush excessively worn swing arm pivot bushes or bearings worn |5.3.4 |a| |i|| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Rear Brake component is severely distorted linkage fouling swinging arm |3.1.5| | 1 |
Offside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Stop lamp not working front control |4.3.1 |a| |ii|| | 1 |
Offside Front Brake hose damaged and likely to fail |1.1.12 |a|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Brake pedal has inadequate reserve travel pedal travels to stop |3.1.3b| | 1 |
Decelerometer brake test indicates a binding brake locks on, cannot be ridden |3.3.E1d| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear wheel insecure rocking wheel when brake binding moves the caliper carrier, wheel cannot be secure |4.2.3b| | 1 |
Wheel alignment incorrect which adversely affects the handling rear wheel offline, bike rides badly |2.5.1| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Headlamp at least one does not illuminate on main beam only works on pass switch |1.2.2a|ii|| | 1 |
Rear Brake caliper|s| insecure front pad pin loose |3.2.A1j| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Nearside Front Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Centre Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear suspension bush has excessive free play TOP SHOCK MOUNT |2.4.A2a|i|| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure rear pillion grab rail (6.1.1 (b) (i)) | 1 |
Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Offside Front Motorcycle structure joining/attachment plate or fastening insecure top fairing trim (6.1.1 (b) (i)) | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Drive chain excessively tight links siezed, chain badly worn (6.1.7 (k) (i)) | 1 |
Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Chain guard insecure (6.1.7 (i)) | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Brake lever mounting insecure |3.1.2a| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Brake caliper insecure |1.1.16 |c| |i|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Rear Drive chain sprocket excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Rear Lower Drive chain excessively tight |6.2.1d| | 1 |
Offside Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Front Inner Riders seat insecure |6.2.1a| | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Drive chain horseshoe locking device likely to become detached already detached (6.1.7 (j) (ii)) | 1 |
Offside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Front Brake master cylinder severely damaged piston not returning |3.2.B1b| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Front Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Offside Front Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Clutch lever shortened so it cannot be readily operated |6.2.7 |b|| | 1 |
Offside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Forks excessively corroded |2.2.2 |d| |i|| | 1 |
Rear Brake lever is positioned so that the brake cannot be readily applied Bent |1.1.2 |d|| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |1.1.2 |d|| | 1 |
Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake hose leaking |1.1.12 |c|| | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected bearings notchy (2.2.2 (f) (ii)) | 1 |
Footrest insecure (6.2.12 (a)) | 1 |
Nearside Rear Drive chain fouling another component sprockets nuts rubbing s/arm |6.2.1d| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear suspension bush has excessive free play s/arm |2.4.A2a|i|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling rear wheel out of alignment |2.5.1| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies switch |1.3.1a| | 1 |
Centre Rear Lower Rear position lamp does not illuminate immediately when it is switched on number plate light |1.1.3a| | 1 |
Direction indicator damaged and function impaired both rear indicators |1.5.3a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Direction indicators not working both |1.5.1c| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Throttle operating incorrectly sticks |6.2.1f| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake switch |1.3.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Fuel system component leaking engine area |7.2.1a| | 1 |
Throttle operating incorrectly throttle controlls insecure |6.2.1f| | 1 |
Rear suspension bush has excessive free play rear swing arm bearing |2.4.A2a|i|| | 1 |
Rear Roller brake test indicates a sticking brake binding |3.3.A1a| | 1 |
Front Brake caliper|s| insecure locking device insecure |3.2.A1j| | 1 |
Rear Brake caliper|s| insecure locking device insecure |3.2.A1j| | 1 |
Direction indicators not working all |1.5.1c| | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Central Rear Stop lamp emits other than a steady red light replace bulb |1.3.1b| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Drive chain excessively tight chain tight between links (6.1.7 (k) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |