Most common failures | No# failures |
---|
Headlamp aim out of alignment | 29 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
Rear Position lamp not working (4.2.1 (a)) | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Drive chain excessively loose |6.2.1d| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn not working |1.7.3a| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Front Brake excessively binding (1.2.1 (f)) | 6 |
Front Position lamp not working (4.2.1 (a)) | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Registration plate issues | 5 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 5 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear Footrest missing |6.2.1a| | 4 |
Handlebar deformed |2.1.1b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Valve stem seriously damaged (5.2.3 (j)) | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Steering lock stop ineffective |2.1.3| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Headlamp switch insecure |1.2.4| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Horn missing |1.7.1| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Nearside Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 2 |
Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Horn not working (7.7 (a) (ii)) | 2 |
Rear Footrest missing (6.2.12 (a)) | 2 |
Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
Offside Rear Footrest missing (6.2.12 (a)) | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Nearside Front Upper Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Exhaust system insecure (6.1.2 (a)) | 2 |
Fuel cap ineffective (6.1.3 (b) (i)) | 2 |
Offside Stop lamp does not illuminate by the operation of both brake controls hand control (4.3.2 (a) (iii)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Front mudguard insecure FRONT MUDGUARD HAS A CRACK IN THE SIDE |2.3.7| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Central Motorcycle structure excessively damaged CENTER STAND IS BROKEN AND RUBBING ON THE DRIVE CHAINE |6.1.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake master cylinder severely damaged |3.2.B1b| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Centre Rear Rear reflector on motorcycle missing no reflector inplace |1.4.1| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies controll 2 |1.3.1a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Offside Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Steering lock stop missing |2.1.3| | 1 |
Nearside Handlebar deformed bent |2.1.1b| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link is wrong way |6.2.1h| | 1 |
Brake hose excessively deteriorated | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Clutch lever positioned so it cannot be readily operated. Bracket loose on handlebars |6.2.1g| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking mudgaurd |6.1.1c| | 1 |
Rear Brake locking device missing brake rod to pedal |3.2.A1e| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Front Brake Lever |6.2.1h| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Rear Brake Lever |6.2.1h| | 1 |
Drive chain fouling another component center stand |6.2.1d| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Steering lock stop ineffective forks hitting tank |2.1.3| | 1 |
Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies opperated |1.3.1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Offside Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Nearside Front shock absorber seal failed and leaking oil due to pitting on fork stantion |2.3.3| | 1 |
Nearside Front suspension assembly component excessively corroded. excess pitting on left stantion causing tears in seal and making it leak |2.3.1| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride torque arm locking pin missing |6.2.1h| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride torque arm locking nut loose |6.2.1h| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake caliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Brake master cylinder leaking Level glass broken , no fluid visable in master cylinder |1.1.10 |b| |ii|| | 1 |
Nearside Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Offside Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
All direction indicators not working intermittent |4.4.1 |a| |ii|| | 1 |
Front Stop lamp not working intermittent |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working intermittent |4.3.1 |a| |ii|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Suspension arm corroded and seriously weakened underside of swinging arm severe corrosion / holes |5.3.3 |b| |i|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Offside Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Brake component insecure REACTION ARM (1.1.21 (c)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Rear Suspension arm insecure and control of the motorcycle impaired (5.3.3 (a) (ii)) | 1 |
Nearside Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced SUSPENSION ARM (6.1.1 (c) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp not working with rear brake (4.3.1 (a) (ii)) | 1 |
Steering linkage locking device ineffective (2.1.3 (d)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle cable being trapped in steering stop (6.2.7 (a) (ii)) | 1 |
Brake cylinder leaking leaking from sight glass (1.1.16 (b) (i)) | 1 |
Suspension component pin or bush excessively worn swinging arm bushes (5.3.4 (a) (i)) | 1 |
Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Exhaust system insecure both sides (6.1.2 (a)) | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Fuel cap ineffective rubber sealing washer split (6.1.3 (b) (i)) | 1 |
Registration plate lamp issues | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Rear Brake pedal insecure (1.1.2 (e) (i)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Offside Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Brake rod insecure (1.1.15 (c)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Nearside Front Handlebar so insecure it is likely to become detached Grip loose (2.2.1 (b) (ii)) | 1 |
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Front Steering headbearing has excessive wear or free play excessive free play (2.2.2 (f) (i)) | 1 |
Horn sound not in accordance with requirements too quiet with engine running (7.7 (c)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel excessive reserve travel (1.1.2 (a)) | 1 |
Offside Front Brake lever has insufficient reserve travel brake lever touches throttle unit when applied (1.1.2 (a)) | 1 |
Horn not working (7.7 (a)) | 1 |
Brake pedal is positioned so that the brake cannot be readily applied Adjusted (1.1.2 (d)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Offside Stop lamp not working hand brake lever switch faulty (4.3.1 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls not working with lights on (4.3.2 (a) (iii)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Central Front Lower Motorcycle structure has a fracture which is likely to adversely affect braking or steering Front lower engine mounting is cracked / broken. (6.1.1 (a) (ii)) | 1 |
Headlamp insecure fixing missing (4.1.1 (c)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Brake master cylinder insecure (1.1.10 (c)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |