Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
Drive chain excessively loose |6.2.1d| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Horn not working |1.7.3a| | 5 |
Registration plate issues | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Handlebar deformed |2.1.1b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear Position lamp not working (4.2.1 (a)) | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Indicator switch defective |1.5.4| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Fuel cap ineffective (6.1.3 (b) (i)) | 2 |
Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front wheel bearings are excessively rough front |2.3.5b| | 1 |
Brake component is severely distorted front |3.1.5| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Rear wheel spindle loose wheel |2.4.A.2b| | 1 |
Steering lock stop missing |2.1.3| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Drive chain sprocket worn to excess loose |6.2.1e| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake master cylinder severely corroded |3.2.B1b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front Headlamp damaged and function impaired |1.2.3a| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Steering headbearing excessively stiff or notchy notchy |2.2.2 |f| |i|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen head lamp fitted wrong, 1/2 turn out |1.6.B.1| | 1 |
Brake pedal mounting insecure bolt loose |3.1.2a| | 1 |
Rear suspension component loose swing arm |2.4.A.1a| | 1 |
Rear suspension bearing has excessive free play swing arm possibly loose |2.4.A2a|i|| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear |1.3.1a| | 1 |
Front position lamp does not illuminate immediately when switched on Front dip beam |1.1.3a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear Brake drum|s| insecure |3.2.A1g| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Direction indicator not working all indicators unreliable. |1.5.1c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Front position lamp does not illuminate immediately when switched on Not working. Bulb replaced. Has slight connection problem contacts impaired by sleeve modified bulb contacts. |1.1.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear suspension component loose swinging arm bolt |2.4.A.1a| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Throttle operating incorrectly not self closing |6.2.1f| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking rear brake pedal return spring not attached |6.1.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride sprocket nuts missing |6.2.1h| | 1 |
Brake fluid reservoir severely corroded |3.2.B1b| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
Nearside Rear Lower Shock absorber likely to become detached bolt loose |5.3.2 |a| |ii|| | 1 |
Rear Stop lamp likely to become detached |4.3.1 |c| |ii|| | 1 |
Chain guard insecure |6.1.7 |i|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Drive chain sprocket so loose it is likely to fail 3 NUTS MISSING (6.1.7 (c) (ii)) | 1 |
Forks excessively corroded (2.2.2 (d) (i)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Central Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Nearside Front Fuel tank leaking excessively or a risk of fire looks to be coming from around petcock (6.1.3 (b) (ii)) | 1 |
Front Brake disc(s) has excessive run out (3.2.A1m) | 1 |
Inner Rear Brake disc(s) has excessive run out (3.2.A1m) | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c) | 1 |
Rear Brake locking device insecure (3.2.A1e) | 1 |
Front Fairings insecure and likely to impede the steering (2.1.2e) | 1 |
Offside Front Indicator tell tale not functioning (1.5.2) | 1 |
Rear Drive chain excessively loose (6.2.1d) | 1 |
Rear Drive chain worn to excess (6.2.1e) | 1 |
Nearside Drive chain sprocket worn to excess (6.2.1e) | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Rear Stop lamp not working foot brake (4.3.1 (a) (ii)) | 1 |
Rear Brake component insecure retaining pin missing (1.1.21 (c)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Rear Brake back plate insecure (1.1.14 (d)) | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Shock absorber insecurely attached Lower bolts loose. (5.3.2 (a) (i)) | 1 |
Brake hose connection leaking front hose (1.1.12 (c)) | 1 |
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Offside Front Throttle operating incorrectly switch insure (6.2.7 (a) (i)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Fuel cap leaking (6.1.3 (b) (i)) | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |
Front Exhaust has a major leak of exhaust gases blowing (6.1.2 (a)) | 1 |
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Forks excessively corroded (2.2.2 (d) (i)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |