| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 25 |
| Drive chain excessively loose |6.2.1d| | 14 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Rear reflector on motorcycle missing |1.4.1| | 11 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Steering headbearing has excessive free play |2.2.2| | 9 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Drive chain worn to excess |6.2.1e| | 6 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
| Brake hose excessively deteriorated | 4 |
| Offside Handlebar deformed |2.1.1b| | 4 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 3 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 3 |
| Rear Brake locking device missing |3.2.A1e| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 3 |
| Front Position lamp not working (4.2.1 (a)) | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
| Horn not working |1.7.3a| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Headlamp insecure |1.2.3b| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Fuel system component leaking (6.1.3 (b) (i)) | 2 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Headlamp insecure (4.1.1 (c)) | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear reflector on motorcycle obscured |1.4.2b| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Fuel tank leaking |7.2.1a| | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Front suspension assembly component excessively misaligned |2.3.1| | 2 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Offside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Headlamp missing |1.2.3a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Nearside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Brake pedal attachment screws loose |3.1.2b| | 1 |
| Front Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Brake clevis joint insecure brake force reaction bar split pin missing (1.1.15 (c)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Brake cylinder leaking |1.1.16 |b| |i|| | 1 |
| Nearside Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Nearside Rear Outer Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake fluid reservoir severely damaged |3.2.B1b| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear |1.3.1a| | 1 |
| Drive chain excessively loose Rear Cush drive (6.1.7 (c) (i)) | 1 |
| Footrest missing Pillion (6.2.12 (a)) | 1 |
| Brake clevis joint insecure Reaction bracket nut insecure + locking device missing (1.1.15 (c)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Brake pedal insecure Pivot bolt locking device missing (1.1.2 (e) (i)) | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Throttle operating incorrectly engine revs stay high when throttle released |6.2.1f| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Nearside Direction indicator insecure |1.5.3b| | 1 |
| Offside Direction indicator insecure |1.5.3b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake lining(s) less than 1.0 mm thick When the rear brake is applied the rear brake lining wear indicator is past its maximum wear mark. (1.1.13 (a)) | 1 |
| Offside Front Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Nearside Direction indicators not working rear indicator missing |1.5.1c| | 1 |
| Offside Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort no r/brake |3.3.A1c| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Upper Fork yoke cracked |2.1.1b| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Rear wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake master cylinder severely damaged |3.2.B1b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Front position lamp does not illuminate immediately when switched on intermittent possibly switch |1.1.3a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on intermittent possibly switch |1.1.3a| | 1 |
| Rear suspension bush has excessive free play swing arm |2.4.A2a|i|| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Stop lamp not working rear brake (4.3.1 (a) (ii)) | 1 |
| Rear Brake excessively binding operating arm sticking (1.2.1 (f)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Brake pedal mounting insecure |3.1.2a| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Motorcycle structure adversely modified crash bars fitted to lower engine mounting point & mounting bolt is insecure |6.1.1b| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear Stop lamp does not emit a steady light No brake light on rear brake. |1.3.1b| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Wheel damaged significantly reducing the original strength Rear hub |4.2.1a| | 1 |
| Drive chain sprocket carrier worn to excess Bearing play |6.2.1e| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking Fuel tank loose |6.1.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Suspension arm pin or bush excessively worn swinging arm bearing/pivot |5.3.4 |a| |i|| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Fuel tank leaking |6.1.3 |b| |i|| | 1 |
| Rear Brake linkage has restricted free movement rubbing on swinging arm |1.1.15 |e|| | 1 |
| Rear Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Rear Brake component insecure brake pedal to brake rod missing locking device |1.1.21 |c|| | 1 |
| Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Rear Footrest missing pilion pegs missing (6.2.12 (a)) | 1 |
| Rear Stop lamp not working not working of rear brake (4.3.1 (a) (ii)) | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Outer Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake lever pivots excessively worn |3.1.3a| | 1 |
| Front Brake hose damaged and likely to fail |1.1.12 |a|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Rear Brake grabbing severely |1.2.1 |c|| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Brake performance not tested |3.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride sprocket |6.2.1h| | 1 |
| Nearside Front Indicator switch insecure |1.5.4| | 1 |
| Offside Front Position lamp switch insecure |1.1.4b| | 1 |
| Offside Throttle operating incorrectly |6.2.1f| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |