>

MOT History from tests of petrol LAVERDA JOTAs year 1981

Review the list of common LAVERDA JOTA failures below or to perform a specific mot history check on your LAVERDA then use our popular KnowYourCar service

mot history
Pass percent:85.48%
(The average a petrol LAVERDA JOTA year 1981 passes without issue)
Based on:372 MOT Tests
Most common failuresNo# failures
Horn not working |1.7.3a|6
Headlamp aim out of alignment5
Front position lamp does not illuminate immediately when switched on |1.1.3a|4
Direction indicators flashing less than 60 times a minute |1.5.1c|3
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2
Horn not loud enough to be heard by another road user |1.7.3a|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Headlamp aim beam image kick up to the offside |1.6|2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Drive chain fouling another component |6.2.1d|1
Drive chain excessively loose |6.2.1d|1
Front Headlamp aim beam image kick up to the offside |1.6|1
Direction indicator flashing less than 60 times a minute |1.5.1c|1
Drive chain worn to excess |6.2.1e|1
Nearside Rear Rear suspension component loose |2.4.A.1a|1
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Front Roller brake test indicates a binding brake |3.3.A1a|1
Offside Front Roller brake test indicates a binding brake |3.3.A1a|1
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Nearside Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c|1
Front Brake master cylinder leaking |1.1.10 |b| |ii||1
Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Rear Drive chain excessively loose |6.2.1d|1
Front Steering lock stop ineffective |2.1.3|1
Front wheel bearings have excessive free play |2.3.5b|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front Horn not loud enough to be heard by another road user |1.7.3a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Nearside Lower Brake caliper has no reserve travel and braking performance affected (1.1.16 (e) (ii))1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Front Brake caliper leaking |1.1.16 |b| |i||1
Rear Brake caliper has no reserve travel and braking performance affected |1.1.16 |e| |ii||1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Rear suspension movement is excessively stiff too much rebound |2.4.A.3b|1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|1
Rear Brake hose leaking fluid |3.2.B4|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear wheel has a loose wheel nut|s| |4.2.3a|1
Offside Handlebar mounting clamp bolt loose (2.1.1a)1
Wheel alignment incorrect which adversely affects the handling (2.5.1)1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Horn not working (7.7 (a) (ii))1
Stop lamp remains on when the brakes are released1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Fuel cap mounting flange/sealing method defective |7.2.2c|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Brake lever cannot be applied smoothly |3.1.3d|1
Nearside Front Footrest insecure |6.2.1a|1
Nearside Rear shock absorber insecurely mounted |2.4.A.3b|1
Steering headbearing has excessive free play |2.2.2|1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Headlamp insecure |1.2.3b|1
Nearside Front Direction indicator insecure |1.5.3b|1
Offside Front Direction indicator insecure |1.5.3b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy