| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Windscreen wiper does not clear the windscreen effectively | 15 |
| Registration plate issues | 8 |
| Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 6 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Registration plate lamp issues | 2 |
| Rear brake disc in such a condition that it is seriously weakened | 2 |
| Brake pipe excessively corroded | 2 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
| Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt at steering box drag link end |2.2.C.1c| | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Central Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Headlamp cleaning device for LED or HID headlamp inoperative (4.1.6 (a) (ii)) | 1 |
| Offside Headlamp cleaning device for LED or HID headlamp inoperative (4.1.6 (a) (ii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Direction indicator not working wing mirror (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour lens missing (4.4.3 (a)) | 1 |
| Windscreen washer not working | 1 |
| Exhaust emissions exceed default limit of 0.7m-1 |8.2.2.2 |b|| | 1 |
| Nearside Rear Passenger`s seat backrest cannot be secured in the upright position. 2nd row |6.2.6 |a| |i|| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect the kick down is on wrong side as European headlamp fitted (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect kick down is on the wrong side as European headlamp fitted (4.1.2 (c)) | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Windscreen has damage | 1 |
| Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
| Exhaust has a major leak of exhaust gases front pipe/silencer flange |7.1.2| | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
| Front Lower Suspension arm pin or bush excessively worn Both |5.3.4 |a| |i|| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Front Service brake grabbing severely |1.2.1 |c|| | 1 |
| Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 1 |
| Front Service brake excessively fluctuating |1.2.1 |e|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |