MOT History from tests of petrol LAND ROVER SERIES 1s year 1960

Review the list of common LAND ROVER SERIES 1 failures below or to perform a specific mot history check on your LAND ROVER then use our popular KnowYourCar service

mot history

Pass percent:70.00%

(The average a petrol LAND ROVER SERIES 1 year 1960 passes without issue)

Based on:60 MOT Tests

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	3
Brakes imbalanced across an axle	3
Offside Headlamp not working on dipped beam \|1.7.5a\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Brake hose damaged	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Front Direction indicator incorrect colour \|1.4.A.2f\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Position lamp switch faulty \|1.1.A.1\|	1
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Headlamp aim not tested \|1.8.A.1c\|	1
Nearside Headlamp not in good working order \|not working\| \|1.2.4a\|	1
Offside Headlamp not in good working order \|not working\| \|1.2.4a\|	1
Steering box has relative movement between sector shaft and the drop arm \|2.2.B.1b\|	1
Intermediate drop arm insecure \|2.2.B.1a\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Upper Drag link end ball joint has excessive play \|2.2.B.1f\|	1
Steering system excessively tight \|2.2.D.1\|	1
Steering system has excessive free play detected at the steering wheel \|steering box fitted\| \|2.2.A.1a\|	1
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Leaf spring eye defective \|shackle\| \|2.4.B.1b\|	1
Offside Front Leaf spring eye defective \|anchor\| \|2.4.B.1b\|	1
Nearside Rear Lower Shock absorber has an excessively worn bush \|2.7.4\|	1
Registration plate lamp issues	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
Offside rear brake recording little or no effort \|3.7.B.5a\|	1
Offside Front Direction indicator incorrect colour \|1.4.A.2f\|	1
Rear brake application uneven	1
Rear brake binding	1
Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Centre Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Body insecure and dangerous to other road users \|6.1.B.1b\|	1
Offside Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Rear Braking system leaking \|3.6.A.1\|	1
Rear Brake pipe inadequately clipped axil \|3.6.B.1\|	1
Direction indicators not working \|1.4.A.2c\|	1
Drag link end ball pin shank loose \|2.2.B.1c\|	1
Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	3
Brakes imbalanced across an axle	3
Offside Headlamp not working on dipped beam \|1.7.5a\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Brake hose damaged	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Front Direction indicator incorrect colour \|1.4.A.2f\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Position lamp switch faulty \|1.1.A.1\|	1
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Headlamp aim not tested \|1.8.A.1c\|	1
Nearside Headlamp not in good working order \|not working\| \|1.2.4a\|	1
Offside Headlamp not in good working order \|not working\| \|1.2.4a\|	1
Steering box has relative movement between sector shaft and the drop arm \|2.2.B.1b\|	1
Intermediate drop arm insecure \|2.2.B.1a\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Upper Drag link end ball joint has excessive play \|2.2.B.1f\|	1
Steering system excessively tight \|2.2.D.1\|	1
Steering system has excessive free play detected at the steering wheel \|steering box fitted\| \|2.2.A.1a\|	1
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Leaf spring eye defective \|shackle\| \|2.4.B.1b\|	1
Offside Front Leaf spring eye defective \|anchor\| \|2.4.B.1b\|	1
Nearside Rear Lower Shock absorber has an excessively worn bush \|2.7.4\|	1
Registration plate lamp issues	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
Offside rear brake recording little or no effort \|3.7.B.5a\|	1
Offside Front Direction indicator incorrect colour \|1.4.A.2f\|	1
Rear brake application uneven	1
Rear brake binding	1
Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Centre Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Body insecure and dangerous to other road users \|6.1.B.1b\|	1
Offside Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Rear Braking system leaking \|3.6.A.1\|	1
Rear Brake pipe inadequately clipped axil \|3.6.B.1\|	1
Direction indicators not working \|1.4.A.2c\|	1
Drag link end ball pin shank loose \|2.2.B.1c\|	1
Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

MOT History from tests of petrol LAND ROVER SERIES 1s year 1960

Find us on Facebook