MOT History from tests of petrol LAND ROVER PICK-UPs year 1970

Review the list of common LAND ROVER PICK-UP failures below or to perform a specific mot history check on your LAND ROVER then use our popular KnowYourCar service

mot history

Pass percent:28.57%

(The average a petrol LAND ROVER PICK-UP year 1970 passes without issue)

Based on:14 MOT Tests

Most common failures	No# failures
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	4
Headlamp aim out of alignment	2
Brake hose excessively deteriorated	2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Windscreen wiper does not clear the windscreen effectively	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1
Offside Windscreen wiper blade missing \|8.2.2\|	1
Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Offside Front Steering component mounting prescribed area is excessively corroded \|2.2.C.1h\|	1
Fuel cap/sealing device sealing washer missing \|7.2.4c\|	1
Offside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams Wired wrong way around ? \|1.7.4b\|	1
Brake hydraulic reservoir fluid level below minimum level \|3.6.G.1b\|	1
Rear brake binding	1
Offside Front Steering component mounting prescribed area is excessively corroded chassis \|2.2.C.1h\|	1
Offside Front Steering component mounting prescribed area is inadequately repaired chassis \|2.2.C.1h\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mounting in rear of front wheel arch \|6.1.B.2\|	1
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Nearside Front Body insecure and dangerous to other road users \|6.1.B.1b\|	1
Brake reservoir fluid level decreases after several pedal applications \|3.3.C.1\|	1
Nearside Front Front passenger door does not latch securely closed \|6.2.B.1a\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front Headlamp not working on dipped beam \|1.7.5a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	4
Headlamp aim out of alignment	2
Brake hose excessively deteriorated	2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Windscreen wiper does not clear the windscreen effectively	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1
Offside Windscreen wiper blade missing \|8.2.2\|	1
Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Offside Front Steering component mounting prescribed area is excessively corroded \|2.2.C.1h\|	1
Fuel cap/sealing device sealing washer missing \|7.2.4c\|	1
Offside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams Wired wrong way around ? \|1.7.4b\|	1
Brake hydraulic reservoir fluid level below minimum level \|3.6.G.1b\|	1
Rear brake binding	1
Offside Front Steering component mounting prescribed area is excessively corroded chassis \|2.2.C.1h\|	1
Offside Front Steering component mounting prescribed area is inadequately repaired chassis \|2.2.C.1h\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mounting in rear of front wheel arch \|6.1.B.2\|	1
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Nearside Front Body insecure and dangerous to other road users \|6.1.B.1b\|	1
Brake reservoir fluid level decreases after several pedal applications \|3.3.C.1\|	1
Nearside Front Front passenger door does not latch securely closed \|6.2.B.1a\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front Headlamp not working on dipped beam \|1.7.5a\|	1

MOT History from tests of petrol LAND ROVER PICK-UPs year 1970

Find us on Facebook