| Most common failures | No# failures |
|---|
| Windscreen washer not working | 3 |
| Headlamp aim out of alignment | 3 |
| Registration plate issues | 2 |
| Brakes imbalanced across an axle | 2 |
| Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Front Upper Axle king pin is loose in the axle beam (5.1.2 (d) (i)) | 1 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn back (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Rear brake binding | 1 |
| Offside All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Damper mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Spring hanger |2.4.A.3| | 1 |
| Offside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Mounting bracket has rotted through,spring inadequately mounted |2.4.A.3| | 1 |
| Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Nearside Rear reflector not red in colour |1.5.1d| | 1 |
| Offside Rear reflector not red in colour |1.5.1d| | 1 |
| Nearside Direction indicator not working |1.4.A.2c| | 1 |
| Offside Direction indicator not working |1.4.A.2c| | 1 |
| Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 1 |
| Battery insecure |1.9.1| | 1 |
| Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner chassis holed |2.4.A.3| | 1 |
| Nearside Steering component mounting prescribed area is excessively corroded chassis steering damper mount |2.2.C.1h| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger |2.4.A.3| | 1 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Axle swivel joint so worn or insecure in a stub axle that directional stability is impaired (5.1.2 (b) (ii)) | 1 |
| Offside Front Axle swivel joint so worn or insecure in a stub axle that directional stability is impaired (5.1.2 (b) (ii)) | 1 |
| Nearside Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 1 |
| Offside Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |