| Most common failures | No# failures |
|---|
| Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Exhaust emits dense blue smoke at idle |7.4.A.1| | 3 |
| Registration plate issues | 3 |
| Exhaust emits excessive dense blue smoke during acceleration |7.4.A2| | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Electrical wiring insecure |1.9.2a| | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Fuel cap/sealing device sealing washer missing |7.2.4c| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear position lamp|s| missing |1.1.A.3a| | 1 |
| Nearside Stop lamp missing |1.2.1a| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside Direction indicator not working |1.4.A.2c| | 1 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Nearside Headlamp does not operate immediately when selected on main beam |1.7.4a| | 1 |
| Offside Headlamp does not operate immediately when selected on main beam |1.7.4a| | 1 |
| Nearside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Offside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Headlamp switch faulty |1.7.1| | 1 |
| Headlamp aim not tested |1.8.A.1c| | 1 |
| Nearside Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Windscreen wiper blade missing |8.2.2| | 1 |
| Centre Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Centre Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| An item not tested |Manual| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Offside Rear Service brake grabbing severely |3.7.C.2| | 1 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
| Rear brake binding | 1 |
| Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Offside Rear Leaf spring fractured |2.4.B.1a| | 1 |
| Nearside Front Direction indicators missing |1.4.A.2b| | 1 |
| Offside Front Direction indicators missing |1.4.A.2b| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Front position lamp|s| missing |1.1.A.3a| | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Nearside Front Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Offside Front Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Horn not working |1.6.2a| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |