MOT History from tests of diesel LAND ROVER 110s year 1964

Review the list of common LAND ROVER 110 failures below or to perform a specific mot history check on your LAND ROVER then use our popular KnowYourCar service

mot history

Pass percent:68.33%

(The average a diesel LAND ROVER 110 year 1964 passes without issue)

Based on:60 MOT Tests

Most common failures	No# failures
Brake pipe excessively corroded	4
Parking brake lever has no reserve travel \|3.1.6b\|	3
Rear brake binding	3
Service brake: efficiency below requirements \|3.7.C.1a\|	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Axle swivel joint has excessive play in a swivel pin \|2.5.A.3b\|	1
Offside Front Shock absorber has an excessively worn linkage \|2.7.4\|	1
Offside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Fuel system component leaking \|7.2.3\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1
Centre Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Front Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Brake pedal spongy \|3.3.B.1b\|	1
Service brake is causing the vehicle to swerve to the offside \|3.7.C.2\|	1
Mechanical brake component has restricted free movement	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring front mounting \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring front mounting \|2.4.A.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement \|7.2.4b\|	1
Fuel cap/sealing device sealing washer missing \|7.2.4c\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front Leaf spring anchor pin excessively loose in its bracket \|2.4.B.3a\|	1
Front Steering column retaining device insecure \|2.1.6\|	1
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Rear brake application uneven	1
Steering box insecure \|2.2.B.1a\|	1
Brake pipe inadequately clipped \|3.6.B.1\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Direction indicator not working \|1.4.A.2c\|	1
Offside Front Drag link end loose \|2.2.B.1d\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Registration plate lamp issues	1
Nearside Rear Direction indicators not working \|1.4.A.2c\|	1
Headlamp aim out of alignment	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Brake pipe excessively corroded	4
Parking brake lever has no reserve travel \|3.1.6b\|	3
Rear brake binding	3
Service brake: efficiency below requirements \|3.7.C.1a\|	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Axle swivel joint has excessive play in a swivel pin \|2.5.A.3b\|	1
Offside Front Shock absorber has an excessively worn linkage \|2.7.4\|	1
Offside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Fuel system component leaking \|7.2.3\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1
Centre Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Front Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Brake pedal spongy \|3.3.B.1b\|	1
Service brake is causing the vehicle to swerve to the offside \|3.7.C.2\|	1
Mechanical brake component has restricted free movement	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring front mounting \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring front mounting \|2.4.A.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement \|7.2.4b\|	1
Fuel cap/sealing device sealing washer missing \|7.2.4c\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front Leaf spring anchor pin excessively loose in its bracket \|2.4.B.3a\|	1
Front Steering column retaining device insecure \|2.1.6\|	1
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Rear brake application uneven	1
Steering box insecure \|2.2.B.1a\|	1
Brake pipe inadequately clipped \|3.6.B.1\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Direction indicator not working \|1.4.A.2c\|	1
Offside Front Drag link end loose \|2.2.B.1d\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Registration plate lamp issues	1
Nearside Rear Direction indicators not working \|1.4.A.2c\|	1
Headlamp aim out of alignment	1

MOT History from tests of diesel LAND ROVER 110s year 1964

Find us on Facebook