| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 5 |
| All position lamps not working |1.1.A.3b| | 3 |
| Nearside Rear Brake pipe fouled by moving parts |3.6.B.2a| | 3 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Brake pipe excessively corroded | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Headlamp not working on dipped beam |1.7.5a| | 2 |
| Power steering inoperative |2.3.3a| | 2 |
| Power steering pump drive system missing |2.3.6| | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside front brake juddering severely |3.7.A.2b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Front passenger seat cannot be secured in the upright position. |6.2.4| | 1 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Nearside Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Nearside Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Horn not working |1.6.2a| | 1 |
| Registration plate lamp issues | 1 |
| Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Brake cable has restricted free movement |3.5.1k| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Headlamp aim unable to be tested not working dip beam (4.1.2 (b)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |