Most common failures | No# failures |
---|
Headlamp aim out of alignment | 120 |
Registration plate lamp issues | 71 |
Parking brake: efficiency below requirements |3.7.B.7| | 60 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 59 |
Windscreen wiper does not clear the windscreen effectively | 47 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 46 |
Parking brake: efficiency below requirements |3.7.C.1b| | 45 |
Brake hose excessively deteriorated | 44 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 42 |
Horn not working |1.6.2a| | 40 |
Brake pipe excessively corroded | 38 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 37 |
Rear parking brake recording little or no effort | 33 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 29 |
Brakes imbalanced across an axle | 24 |
Offside Rear fog lamp not working |1.3.2b| | 21 |
Rear brake binding | 21 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 21 |
Offside Front position lamp|s| not working |1.1.A.3b| | 21 |
Service brake: efficiency below requirements |3.7.B.7| | 20 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 20 |
Battery insecure |1.9.1| | 19 |
Offside Headlamp not working on main beam |1.7.5a| | 19 |
Registration plate issues | 18 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 17 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 17 |
Exhaust has a major leak of exhaust gases |7.1.2| | 17 |
Nearside Headlamp not working on main beam |1.7.5a| | 15 |
Service brake: efficiency below requirements |3.7.C.1a| | 14 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 14 |
Nearside Front Direction indicator not working |1.4.A.2c| | 14 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 14 |
Offside Front Headlamp not working on main beam |1.7.5a| | 13 |
Brake load sensing valve linkage seized |3.6.E.3| | 13 |
Nearside Stop lamp not working |1.2.1b| | 12 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 12 |
Nearside Side repeater not working |1.4.A.2c| | 11 |
Offside Headlamp not working on dipped beam |1.7.5a| | 11 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 11 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 11 |
Front brake disc in such a condition that it is seriously weakened | 10 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
Windscreen washer not working | 10 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 10 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 10 |
Indicator switch faulty |1.4.A.1| | 10 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 10 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 9 |
Nearside Rear Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 9 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 9 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 9 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 9 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
Brake performance not tested |3.7.A.1| | 8 |
Offside Stop lamp not working |1.2.1b| | 8 |
Offside Side repeater not working |1.4.A.2c| | 8 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 8 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 8 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 8 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 8 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 7 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 7 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 7 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 7 |
Offside rear brake recording little or no effort |3.7.B.5a| | 7 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 7 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Parking brake lever has no reserve travel |3.1.6b| | 7 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 7 |
Brake hose has insufficient room to move | 7 |
Offside Headlamp insecure |1.7.3| | 6 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 6 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 6 |
Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 6 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 6 |
Offside Rear Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 6 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Fuel hose leaking |7.2.3| | 6 |
Nearside Headlamp insecure |1.7.3| | 6 |
Nearside Front brake disc excessively pitted |3.5.1h| | 6 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Emissions not tested |7.0| | 5 |
Windscreen has damage | 5 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 5 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 5 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 5 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
Offside Steering rack gaiter split |2.2.D.2d| | 5 |
Offside Rear Rear fog lamp not working |1.3.2b| | 5 |
Offside Front Direction indicator not working |1.4.A.2c| | 5 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 5 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear Stop lamp not working |1.2.1b| | 5 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 5 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 5 |
All position lamps not working |1.1.A.3b| | 4 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 4 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Fuel system component insecure |7.2.1| | 4 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 4 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 4 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 4 |
Offside Front Headlamp not in good working order |not working| |1.2.4a| | 4 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 4 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 4 |
Rear fog lamp tell tale not working |1.3.1b| | 4 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 4 |
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 4 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 4 |
Rear brake disc in such a condition that it is seriously weakened | 4 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 4 |
Offside Headlamp aim beam image kick up to the offside |1.6.B1| | 4 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 4 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 4 |
Offside Front Side repeater not working |1.4.A.2c| | 4 |
Steering column will not lock in a fixed position |adjustable type| |2.1.2a| | 4 |
Offside Front Headlamp insecure |1.7.3| | 4 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 4 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 4 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 4 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
Offside Front brake disc excessively pitted |3.5.1h| | 4 |
Rear Mechanical brake component has restricted free movement | 4 |
Brake hose damaged | 3 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Rear Shock absorber detached |2.7.2b| | 3 |
Offside front brake binding |3.7.B.1| | 3 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
Brake pedal spongy |3.3.B.1b| | 3 |
Exhaust emits dense blue smoke at idle |7.3.A.2b| | 3 |
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
Headlamp not working on main beam |1.7.5a| | 3 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 3 |
Nearside Indicator switch faulty |1.4.A.1| | 3 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 3 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
Headlamp switch faulty |1.7.1| | 3 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 3 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 3 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 3 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 3 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 3 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 3 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 3 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
Front Exhaust system not adequately supported |7.1.1| | 3 |
Rear Exhaust system not adequately supported |7.1.1| | 3 |
Nearside Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 3 |
Rear Rear fog lamp not working |1.3.2b| | 3 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 3 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
Anti-lock braking system warning lamp indicates an ABS fault | 3 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Hazard warning switch faulty |1.4.B.1d| | 3 |
Exhaust system not adequately supported |7.1.1| | 3 |
Front Fuel hose leaking |7.2.3| | 3 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Rear Stop lamp not working |1.2.1b| | 3 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 3 |
Nearside Rear brake disc excessively pitted |3.5.1h| | 3 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 3 |
Offside Front front brake binding |3.7.B.1| | 3 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
Offside Front Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 3 |
Offside Rear Trailing arm has excessive play in a pin/bush |2.4.G.2| | 3 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 3 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 2 |
Offside Front Brake pipe inadequately clipped |3.6.B.1| | 2 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Nearside Rear Shock absorber detached |2.7.2b| | 2 |
Front brake disc excessively pitted |3.5.1h| | 2 |
Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 2 |
Nearside Rear Macpherson strut insecure |2.4.G.1| | 2 |
Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 2 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 2 |
Nearside Steering rack gaiter split |2.2.D.2d| | 2 |
Braking system leaking |3.6.A.1| | 2 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 2 |
Nearside Front Outer Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 2 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 2 |
Rear Exhaust mounting missing |7.1.1b| | 2 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Rear brake application uneven | 2 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 2 |
Nearside Outer Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Outer Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 2 |
Offside Front Suspension arm attachment bracket/mounting bolt missing |2.4.G.1| | 2 |
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 2 |
Driver`s seat insecure |6.2.A.1| | 2 |
Offside Front Brake hose excessively damaged |3.6.B.4d| | 2 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brake pipe leaking |3.6.A.1| | 2 |
Nearside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Brake master cylinder fluid level below minimum level |3.6.G.1e| | 2 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Exhaust mounting missing |7.1.1b| | 2 |
Brake pedal anti-slip provision incomplete |3.3.A.1b| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Nearside Rear Wheel bolt|s| missing |4.2.A.1e| | 2 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 2 |
Offside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Headlamp aim beam image kick up to the offside |1.8| | 2 |
Offside Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 2 |
Offside Rear Brake pipe inadequately supported |3.6.B.1| | 2 |
Offside Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 2 |
Offside Front All position lamps not working |1.1.A.3b| | 2 |
Offside Rear All position lamps not working |1.1.A.3b| | 2 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Centre Exhaust system not adequately supported |7.1.1| | 2 |
Offside front brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Parking brake inoperative on one side (1.4.1 (a)) | 2 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Offside Front Brake pipe inadequately supported |3.6.B.1| | 2 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
Offside Front Obligatory mirror missing |8.1.1| | 2 |
Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 2 |
Nearside Headlamp aim beam image too far to the left |1.6.B4| | 2 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Horn sounds harsh or grating |1.6.2e| | 2 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 2 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 2 |
Offside Headlamp not in good working order |not working| |1.2.4a| | 2 |
Nearside Rear Coil spring not correctly located |2.4.C.2| | 2 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
Steering column top bearing excessively worn |2.1.2c| | 2 |
Nearside Front Wheel bolt|s| missing |4.2.A.1e| | 2 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Rear passenger seat cannot be secured in the upright position. |6.2.3| | 2 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Nearside Front front brake juddering severely |3.7.A.2b| | 2 |
Horn not loud enough to be heard by another road user |1.6.2b| | 2 |
Offside Front Wheel bolt|s| missing |4.2.A.1e| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Nearside Front Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 2 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Brake pipe inadequately clipped |3.6.B.1| | 2 |
Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 2 |
Offside Rear brake disc excessively pitted |3.5.1h| | 2 |
Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 2 |
Front Headlamp not working on main beam |1.7.5a| | 2 |
Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 2 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 2 |
Offside Rear Coil spring not correctly located |2.4.C.2| | 2 |
Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
Nearside Rear Body has a projection caused by corrosion |6.1.C.1| | 2 |
Fuel tank leaking |7.2.3| | 2 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Side repeater not working |1.4.A.2c| | 2 |
Nearside Side repeater insecure |1.4.A.2b| | 2 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
Offside Rear Shock absorber insecure |2.7.2b| | 2 |
Main beam `tell-tale` not working |1.7.4c| | 2 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Offside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 2 |
Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 2 |
Offside Outer Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Nearside Outer Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Centre Exhaust mounting missing |7.1.1b| | 2 |
Nearside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 2 |
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 2 |
Offside Rear Exhaust system not adequately supported |7.1.1| | 2 |
Horn control missing |1.6.1| | 2 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |