Most common failures | No# failures |
---|
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Offside Rear fog lamp not working |1.3.2b| | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Front brake disc in such a condition that it is seriously weakened | 3 |
Registration plate issues | 2 |
Brakes imbalanced across an axle | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
Brake hose excessively deteriorated | 2 |
Rear parking brake recording little or no effort | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Offside Rear Suspension arm locating pin incorrectly positioned |2.4.G.3a| | 1 |
Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Headlamp aim out of alignment | 1 |
Nearside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Nearside Front Shock absorbers has a serious fluid leak | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Horn not working |1.6.2a| | 1 |
Windscreen wiper blade insecure | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Hand operated control valve malfunctioning |3.2.2c| | 1 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
An item not tested |Manual| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Brake pedal functionally incomplete |3.3.A.1a| | 1 |
Rear brake binding | 1 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Obligatory mirror insecure |8.1.1| | 1 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Nearside Front Anti-roll bar pin or bush excessively worn arb bush in the lower arm (5.3.4 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen wiper not working (3.4 (a)) | 1 |
Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 1 |