| Most common failures | No# failures |
|---|
| Registration plate lamp issues | 17 |
| Brake pipe excessively corroded | 14 |
| Parking brake: efficiency below requirements |3.7.B.7| | 9 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 8 |
| Service brake: efficiency below requirements |3.7.B.7| | 8 |
| Headlamp aim out of alignment | 7 |
| Offside Rear fog lamp not working |1.3.2b| | 5 |
| Windscreen wiper does not clear the windscreen effectively | 5 |
| Rear fog lamp tell tale not working |1.3.1b| | 4 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 3 |
| Offside Steering rack gaiter split |2.2.D.2d| | 3 |
| Rear parking brake recording little or no effort | 3 |
| Rear brake binding | 3 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Headlamp not working on main beam |1.7.5a| | 3 |
| Mechanical brake component has restricted free movement | 3 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
| Offside Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Offside Headlamp not working on main beam |1.7.5a| | 2 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 2 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Brake hose excessively deteriorated | 2 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Rear Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Horn not working |1.6.2a| | 2 |
| Front brake application uneven | 2 |
| Offside Front front brake binding |3.7.B.1| | 2 |
| Registration plate issues | 2 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 2 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 2 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Brake hose has insufficient room to move | 2 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Offside Rear Seat belt retracting mechanism defective (7.1.2 (e)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Service brake lagging in operation (1.2.1 (d)) | 1 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Offside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Nearside Rear All position lamps not working |1.1.A.3b| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Steering rack gaiter split |2.2.D.2d| | 1 |
| Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Side repeater not working |1.4.A.2c| | 1 |
| Nearside Outer Headlamp not working on dipped beam |1.7.5a| | 1 |
| Fuel cap/sealing device missing (6.1.3 (b) (i)) | 1 |
| Nearside Windscreen wiper not working arm broken (3.4 (a)) | 1 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Fuel pipe leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Oil leaking excessively from engine oil switch? (8.4.1 (a) (i)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Front Brake hose leaking |3.6.A.1| | 1 |
| Brake valve leaking |3.6.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Power steering inoperative |2.3.3a| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| An item not tested |Manual| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Upper Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill/facing panel |2.4.A.3| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Steering column top mounting bracket insecure |2.1.2d| | 1 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Offside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Front Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
| Offside Front Rear fog lamp not working |1.3.2b| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Offside Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear brake disc excessively pitted |3.5.1h| | 1 |
| Offside Rear brake disc excessively pitted |3.5.1h| | 1 |
| Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Front Exhaust system not adequately supported |7.1.1| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Rear Braking system leaking |3.6.A.1| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Fuel tank insecure BOOT FLOOR CORRODED |7.2.1| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| brake disc excessively pitted |3.5.1h| | 1 |
| Emissions not tested |7.0| | 1 |
| Headlamp aim not tested |1.8.A.1c| | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
| Offside Front Brake hose connection leaking on a hydraulic braking system at caliper. (1.1.12 (c) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch. (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside front brake juddering severely |3.7.A.2b| | 1 |
| Offside front brake juddering severely |3.7.A.2b| | 1 |
| Brakes imbalanced across an axle | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Parking |secondary brake| on a single line braking system imbalanced across an axle Axle 1 |1.3.1 |b| |i|| | 1 |
| Nearside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Front Brake pipe leaking |3.6.A.1| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Battery insecure |1.9.1| | 1 |
| Offside Rear Panhard rod severely distorted |2.4.G.1| | 1 |
| Steering column has excessive movement up and down (2.2.2 (a)) | 1 |
| Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Exhaust engine idle speed too high |7.3.A.2a| | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Horn not working (1.6.2a) | 1 |
| Nearside Rear Shock absorbers has a serious fluid leak | 1 |
| Offside Rear Shock absorbers has a serious fluid leak | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point/ outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch adjacent to strut tower (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Integral body structure is fractured and structural rigidity is significantly reduced inner arch adjacent to strut tower (6.1.1 (a) (i)) | 1 |
| Nearside Front brake caliper has restricted free movement |3.5.1k| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Nearside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Nearside Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength on front panel, chalk marked (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength on vehicle floor area, chalk marked (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced under vehicle, chalk marked (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near inner sill, chalk marked (5.3.6 (a) (i)) | 1 |
| Nearside Electrical wiring insulation so damaged or deteriorated it is likely to cause a short-circuit under bonnet, wiring loom rubbing on steering gear (4.11 (c) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated |1.1.6 |d|| | 1 |
| Nearside Front Position lamp not working side |4.2.1 |a|| | 1 |
| Offside Front Position lamp not working side |4.2.1 |a|| | 1 |