| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 13 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 3 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Headlamp insecure (4.1.1 (c)) | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Registration plate issues | 2 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Registration plate lamp issues | 2 |
| Riders seat insecure (6.2.5 (a) (ii)) | 2 |
| Rear Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Brake caliper insecure |1.1.16 |c| |i|| | 1 |
| Rear Brake caliper inadequately mounted |1.1.16 |c| |i|| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Brake fluid reservoir severely damaged |3.2.B1b| | 1 |
| Brake locking device insecure Rar pad retaining pin |3.2.A1e| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake component has an inadequate repair |3.1.5| | 1 |
| Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Horn sounds harsh or grating |1.7.3c| | 1 |
| All direction indicators incorrect colour ALL SHOWING WHITE LIGHT (4.4.3 (a)) | 1 |
| Rear Position lamp not working CAN NOT DETERMINE IF WORKING BECAUSE BRAKE LIGHT STUCK ON (4.2.1 (a)) | 1 |
| Exhaust has a major leak of exhaust gases Severe corrosion - holes (6.1.2 (a)) | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies drivers right hand operation |1.3.1a| | 1 |
| Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Stop lamp not working from rear brake lever (4.3.1 (a) (ii)) | 1 |
| Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced rear rack/rear body (6.1.1 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |