MOT History from tests of petrol LAMBRETTA SX150s year 1969

Review the list of common LAMBRETTA SX150 failures below or to perform a specific mot history check on your LAMBRETTA then use our popular KnowYourCar service

mot history

Pass percent:90.51%

(The average a petrol LAMBRETTA SX150 year 1969 passes without issue)

Based on:295 MOT Tests

Most common failures	No# failures
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Registration plate issues	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Throttle operating incorrectly \|6.2.1f\|	2
Front Headlamp switch insecure \|1.2.4\|	1
Fuel pipe leaking \|7.2.1a\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Headlamp not working on main beam (4.1.1 (a) (ii))	1
Stop lamp not working (4.3.1 (a) (ii))	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front position lamp incorrect colour \|1.1.2a\|	1
Front Brake caliper\|s\| insecure \|3.2.A1j\|	1
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Rear reflector on motorcycle deteriorated and function impaired \|1.4.2a\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Centre Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Headlamp aim out of alignment	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Riders seat insecure \|6.2.1a\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Registration plate issues	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Throttle operating incorrectly \|6.2.1f\|	2
Front Headlamp switch insecure \|1.2.4\|	1
Fuel pipe leaking \|7.2.1a\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Headlamp not working on main beam (4.1.1 (a) (ii))	1
Stop lamp not working (4.3.1 (a) (ii))	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front position lamp incorrect colour \|1.1.2a\|	1
Front Brake caliper\|s\| insecure \|3.2.A1j\|	1
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Rear reflector on motorcycle deteriorated and function impaired \|1.4.2a\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Centre Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Headlamp aim out of alignment	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Riders seat insecure \|6.2.1a\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1

MOT History from tests of petrol LAMBRETTA SX150s year 1969

Find us on Facebook