Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
Registration plate issues | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Horn not working |1.7.3a| | 2 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Brake lining|s| contaminated by oil or grease |3.2.A1k| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Front Front suspension assembly component loose Lower shock absorber nut missing |2.3.1| | 1 |
Lower Brake pedal insecure Cir-clip insecure |3.1.2a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Front Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Offside Rear Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Position lamp not working bulb |4.2.1 |a|| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Brake cylinder insecure (1.1.16 (c) (i)) | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
Front Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Brake linkage excessively damaged |3.2.A1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Rear wheel has a missing wheel bolt|s| |4.2.3a| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Throttle operating incorrectly sticks open does not return |6.2.1f| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |