Most common failures | No# failures |
---|
Headlamp aim out of alignment | 40 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 28 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 27 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 17 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 16 |
Steering headbearing has excessive free play |2.2.2| | 12 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 12 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 12 |
Brake pedal has inadequate reserve travel |3.1.3b| | 12 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 11 |
Horn not working |1.7.3a| | 11 |
Registration plate issues | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Front Steering headbearing has excessive free play |2.2.2| | 5 |
Brake pedal insecure |3.1.2a| | 4 |
Headlamp aim not tested |1.6| | 4 |
An item not tested |Manual| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 3 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 3 |
Rear Brake pedal insecure |3.1.2a| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front Horn not working |1.7.3a| | 3 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Rear wheel insecure |4.2.3b| | 2 |
Front suspension assembly component loose |2.3.1| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Stop lamp affected by the operation of the horn |1.3.2| | 2 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Front suspension assembly component excessively misaligned |2.3.1| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear wheel has a missing wheel stud|s| |4.2.3a| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 2 |
Brake lever is inoperative |3.1.3c| | 2 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Upper Steering headbearing has excessive free play |2.2.2| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 2 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 2 |
Brake pedal pivots excessively worn |3.1.3a| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Fuel cap missing |7.2.2a| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Front Lower Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front suspension assembly component loose |2.3.1| | 1 |
Offside Front suspension assembly component loose |2.3.1| | 1 |
Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake component is severely distorted |3.1.5| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Brake hose excessively deteriorated | 1 |
Offside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Nearside Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Centre Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Upper Headlamp switch faulty |1.2.4| | 1 |
Offside Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake component is fractured |3.1.5| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Throttle operating incorrectly Throttle does not return to off position automatically |6.2.1f| | 1 |
Front All position lamps not working dipped beam and high beam not working..| no bulb| |4.2.1 |a|| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Offside Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Rear Lower Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Motorcycle structure excessively distorted |6.1.1a| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Front suspension spring incomplete |2.2.1b|I|| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Rear Brake drum|s| insecure |3.2.A1g| | 1 |
Front Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Brake locking device insecure |3.2.A1e| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Motorcycle structure cracked frame |6.1.1a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear hub nut loose |6.2.1h| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Centre Front Headlamp switch faulty |1.2.4| | 1 |
Centre Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Brake lever insecure |3.1.2a| | 1 |
Front Front position lamp does not illuminate immediately when switched on side light |1.1.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on dipped beam |1.1.3a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Front wheel insecure |4.2.3b| | 1 |
Horn control defective |1.7.2a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Brake cable badly frayed |3.2.A1b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Stop lamp lens defective such that the emitted light is adversely affected stop lamp and brake lamp switched round, unable to see stop lamp when position lamp is on |4.3.1 |b| |ii|| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |