Most common failures | No# failures |
---|
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Registration plate issues | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Headlamp aim not tested |1.6| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Headlamp aim out of alignment | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Centre Rear Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Centre Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Brake drum|s| insecure |3.2.A1g| | 1 |
Front Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear Gradient brake test indicates a severely grabbing brake |3.3.D1d| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
An item not tested |Manual| | 1 |
Front Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
Front position lamp does not illuminate immediately when switched on side light |1.1.3a| | 1 |
Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
Plate brake test Neither brake control achieves an efficiency of 25% |3.3.B2b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Seat insecure |6.2.1a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |