Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Registration plate issues | 11 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Headlamp aim not tested |1.6| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Horn not working |1.7.3a| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Brake pedal has inadequate reserve travel rear brake border line |3.1.3b| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Position lamp not working dipped beam |4.2.1 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Offside Front Shock absorber insecurely attached Lower but not locked (5.3.2 (a) (i)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |