Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Registration plate issues | 13 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Headlamp switch faulty |1.2.4| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Horn not working |1.7.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Centre Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Headlamp aim not tested |1.6| | 1 |
An item not tested |Manual| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Nearside Front suspension assembly component loose |2.3.1| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Throttle operating incorrectly sticking |6.2.1f| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake component is fractured |3.1.5| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Brake pedal attachment screws missing. |3.1.2b| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Central Rear Lower Position lamp not working |4.2.1 |a|| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Offside Front suspension assembly component loose |2.3.1| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |