MOT History from tests of petrol LAMBRETTA GP150s year 1977

Review the list of common LAMBRETTA GP150 failures below or to perform a specific mot history check on your LAMBRETTA then use our popular KnowYourCar service

mot history

Pass percent:86.06%

(The average a petrol LAMBRETTA GP150 year 1977 passes without issue)

Based on:251 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	12
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Brake locking device insecure \|3.2.A1e\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front Brake locking device insecure \|3.2.A1e\|	1
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Centre Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Registration plate issues	1
Front wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Rear Front wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Rear wheel rotation likely to be impeded \|6.2.1b\|	1
Fuel hose leaking \|7.2.1a\|	1
Headlamp insecure \|1.2.3b\|	1
Offside Rear Fairings insecure and likely to impede the steering \|2.1.2e\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Brake pedal has insufficient reserve travel \|1.1.2 \|a\|\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Front Brake master cylinder leaking hydraulic fluid \|3.2.B1e\|	1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))	1
Front Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	12
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Brake locking device insecure \|3.2.A1e\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front Brake locking device insecure \|3.2.A1e\|	1
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Centre Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Registration plate issues	1
Front wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Rear Front wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Rear wheel rotation likely to be impeded \|6.2.1b\|	1
Fuel hose leaking \|7.2.1a\|	1
Headlamp insecure \|1.2.3b\|	1
Offside Rear Fairings insecure and likely to impede the steering \|2.1.2e\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Brake pedal has insufficient reserve travel \|1.1.2 \|a\|\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Front Brake master cylinder leaking hydraulic fluid \|3.2.B1e\|	1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))	1
Front Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	1

MOT History from tests of petrol LAMBRETTA GP150s year 1977

Find us on Facebook