Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Brake pedal has inadequate reserve travel |3.1.3b| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Horn not working |1.7.3a| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
Riders seat insecure |6.2.1a| | 5 |
Registration plate issues | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Offside Inner Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Brake pedal insecure circlip missing |3.1.2a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Centre Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Headlamp light intensity severely reduced when horn is used |4.1.4 |a|| | 1 |
Front Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Rear Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Brake pedal attachment screws missing. |3.1.2b| | 1 |
Front Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Stop lamp does not illuminate immediately a brake applies if lights are on |1.3.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure. corrosion on fork leg by link mounting bolt |2.3.8| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |