Most common failures | No# failures |
---|
Headlamp aim out of alignment | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Stop lamp remains on when the brakes are released | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Rear Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Brake back plate|s| insecure |3.2.A1j| | 1 |
Front Lower Exhaust mounting missing |7.1.1c| | 1 |
Fuel system component insecure fuel pipe clip |7.2.1b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |