Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
Headlamp aim out of alignment | 12 |
Rear reflector on motorcycle missing |1.4.1| | 11 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Rear Front mudguard insecure |2.3.7| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Registration plate issues | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Registration plate lamp issues | 3 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Brake lever attachment screws missing |3.1.2b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Headlamp aim not tested |1.6| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Position lamp not working both |4.2.1 |a|| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Brake lever insecure |3.1.2a| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Horn not working |1.7.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear reflector missing covered by l plate (4.8.2 (a) (ii)) | 1 |
Front Brake caliper insecure bolt missing (1.1.16 (c) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Dipswitch does not operate immediately when selected on main beam switch damaged (4.1.3 (b)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |