Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Steering lock stop missing |2.1.3| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Horn not working |1.7.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Nearside Brake lever pivots excessively worn |3.1.3a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Handlebar mounting clamp loose |2.1.1a| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake cable excessively corroded |3.2.A1b| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp aim headlamp damaged and function impaired bad contact on bulb |1.2.3a| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Registration plate issues | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Rear Upper Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |