| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Rear reflector on motorcycle missing |1.4.1| | 14 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 13 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Steering headbearing has excessive free play |2.2.2| | 9 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Horn not working |1.7.3a| | 7 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Direction indicators not working |1.5.1c| | 4 |
| Rear reflector on motorcycle obscured |1.4.1| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Fuel cap sealing washer missing |7.2.2c| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Centre Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Registration plate lamp issues | 1 |
| Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front shock absorber seal failed and leaking oil right hand fork seal leakng |2.3.3| | 1 |
| Roller brake test indicates a severely grabbing brake front brake severely grabbing |3.3.A1b| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Rear Brake lever cracked |3.1.2c| | 1 |
| Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front suspension has severe distortion of a load bearing member or its supporting structure. |2.3.8| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| An item not tested |Manual| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear Rear wheel insecure |4.2.3b| | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Rear Valve stem seriously damaged Rear valve stem rubber badly perished, Possible instant deflation (5.2.3 (j)) | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Brake grabbing severely |1.2.1 |c|| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Registration plate issues | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Brake component has an inadequate repair Rear brake cable securing |3.1.5| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Fork yoke deformed |2.1.1b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Steering linkage has excessive free play movement at bars when front wheel held in fixed position |2.2.2| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies doesn`t work |1.3.1a| | 1 |