Most common failures | No# failures |
---|
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 15 |
Headlamp aim out of alignment | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Registration plate issues | 6 |
Riders seat insecure |6.2.1a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Exhaust excessively deteriorated |7.1.1a| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Rear position lamp missing |1.1.1a| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Stop lamp obscured |1.3.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Rear Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Brake lever mounting cracked |3.1.2c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Brake master cylinder severely damaged |3.2.B1b| | 1 |
Front Brake master cylinder has an excessively worn master cylinder pivot. |3.2.B5| | 1 |
Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
Nearside Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Brake hose damaged | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Registration plate lamp issues | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
An item not tested |Manual| | 1 |
Rear Roller brake test indicates a binding brake seriously binding |3.3.A1a| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |