Most common failures | No# failures |
---|
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 24 |
Headlamp aim out of alignment | 23 |
Drive chain excessively loose |6.2.1d| | 13 |
Drive chain worn to excess |6.2.1e| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Nearside Rear Footrest missing |6.2.1a| | 8 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Offside Rear Footrest missing |6.2.1a| | 5 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Rear Footrest missing |6.2.1a| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Drive chain worn to excess (6.1.7 (c) (i)) | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Rear Footrest missing (6.2.12 (a)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Drive chain sprocket worn to excess |6.2.1e| | 2 |
Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 2 |
Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Rear reflector on motorcycle obscured |1.4.2b| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Headlamp insecure |4.1.1 |c|| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Direction indicators not working |1.5.1c| | 1 |
Offside Front Upper Direction indicator not working |1.5.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Clutch lever shortened so it cannot be readily operated. cannot get all fingers on clutch lever |6.2.1g| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Indicator tell tale not functioning |1.5.2| | 1 |
Offside Front Indicator tell tale not functioning |1.5.2| | 1 |
Stop lamp not working foot control (4.3.1 (a) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Headlamp aim not tested no clear pattern to check (4.1.2 (b)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Motorcycle structure has a fracture which is likely to adversely affect braking or steering bolt missing front fender mud gaurd brocken (6.1.1 (a) (ii)) | 1 |
Handlebar mounting insecure left hand switch loose (2.2.1 (a) (i)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure nut missing clutch lever (6.1.1 (b) (i)) | 1 |
Front Throttle operating incorrectly Start switch insecure and affecting throttle (6.2.7 (a) (i)) | 1 |
Rear Wheel hub excessively worn (5.2.1 (b) (i)) | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Stop lamp does not illuminate immediately a brake applies rear pedal |1.3.1a| | 1 |
Dipswitch does not operate immediately when selected on dipped beam switch broke (4.1.3 (b)) | 1 |
Rear Suspension arm ball joint excessively worn swinging arm bushes (5.3.4 (a) (i)) | 1 |
Rear Stop lamp switch with a delay in operation not working (4.3.2 (a) (ii)) | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Horn not working |1.7.3a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Brake lever has inadequate reserve travel bent lever |3.1.3b| | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain sprocket worn to excess Cush drive rubbers excessively worn (6.1.7 (c) (i)) | 1 |
Front Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear suspension bush has excessive free play bush have free play |2.4.A2a|i|| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Footrest missing |6.2.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Central Front Exhaust system insecure |6.1.2 |a|| | 1 |
Lower Brake pedal so insecure that the brake cannot be readily applied foot brake |hitting exhaust| |1.1.2 |e| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Rear Brake lever excessively worn (1.1.15 (b)) | 1 |
Front Brake component inadequately mounted calliper (1.1.21 (c)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Rear Rear suspension bush has excessive free play Swinging arm pivot point |2.4.A2a|i|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Fuel cap leaking Swollen & leaking (6.1.3 (b) (i)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear reflector missing Not visible - covered by L plate (4.8.2 (a) (ii)) | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Outer Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Shock absorber has a serious fluid leak chrome peeling and rusting on fork legs seal leaking (5.3.2 (b)) | 1 |
Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Exhaust system insecure Badly rusted and breaking (6.1.2 (a)) | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Headlamp aim not tested due to being insecure |4.1.2 |b|| | 1 |
Rear Footrest missing both |6.2.12 |a|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies switch |1.3.1a| | 1 |
Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp damaged and function impaired |1.2.3a| | 1 |
Clutch lever shortened so it cannot be readily operated |6.2.7 |b|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Suspension arm likely to become detached (5.3.3 (a) (ii)) | 1 |
Brake clevis joint insecure (1.1.15 (c)) | 1 |
Suspension arm attachment bracket/mounting insecure swing arm play (5.3.3 (a) (i)) | 1 |
Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Central Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Front Floor brake test indicates a sticking brake (3.3.C2c) | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Front Direction indicator not working (1.5.1c) | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Suspension arm pin or bush excessively worn swing arm |5.3.4 |a| |i|| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies from rear brake |1.3.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Roller brake test indicates a sticking brake rear pedal not returning |3.3.A1a| | 1 |
Fuel hose leaking |6.1.3 |b| |i|| | 1 |
Position lamp not working brake light showing (4.2.1 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |