Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Registration plate lamp issues | 4 |
Registration plate issues | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Horn not working |1.7.3a| | 3 |
Front position lamp insecure |1.1.1c| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Brake drum significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Brake lever has insufficient reserve travel Rear brake lever (1.1.2 (a)) | 1 |
Front Brake indicates excessive fluctuation of brake effort Front disc warped (1.2.1 (e)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Brake cable excessively worn (1.1.15 (b)) | 1 |
Front Brake indicates excessive fluctuation of brake effort Disc warped (1.2.1 (e)) | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Stop lamp does not illuminate immediately a brake applies Front |1.3.1a| | 1 |