Most common failures | No# failures |
---|
Steering headbearing has excessive free play |2.2.2| | 18 |
Headlamp aim out of alignment | 13 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Handlebar mounting clamp bolt loose |2.1.1a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Direction indicators not working |1.5.1c| | 3 |
Registration plate issues | 3 |
Horn not working |1.7.3a| | 3 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 2 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Position lamp switch insecure |1.1.4b| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake component is fractured |3.1.5| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Centre Front Lower Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Inner Front Lower Front wheel insecure |4.2.3b| | 1 |
Outer Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Inner Front Upper Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Inner Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Inner Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Inner Front Lower Throttle operating incorrectly |6.2.1f| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Brake lever mounting insecure |3.1.2a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |