Most common failures | No# failures |
---|
Headlamp aim out of alignment | 69 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 36 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 22 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 21 |
Horn not working |1.7.3a| | 18 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Exhaust is leaking and excessively noisey |7.1.1b| | 16 |
Throttle operating incorrectly |6.2.1f| | 15 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Steering headbearing has excessive free play |2.2.2| | 13 |
Riders seat insecure |6.2.1a| | 12 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 10 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 9 |
Front wheel bearings are excessively rough |2.3.5b| | 9 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 9 |
Headlamp aim beam image kick up to the offside |1.6| | 8 |
Registration plate issues | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Front Brake excessively binding (1.2.1 (f)) | 6 |
Direction indicators not working |1.5.1c| | 5 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 5 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 4 |
Headlamp switch insecure |1.2.4| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear wheel rotation likely to be impeded |6.2.1b| | 4 |
Rear Brake lever insecure |3.1.2a| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Position lamp switch insecure |1.1.4b| | 3 |
Headlamp aim not tested |1.6| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Horn not working (7.7 (a)) | 3 |
Headlamp switch faulty |1.2.4| | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Fuel cap sealing washer torn |7.2.2c| | 2 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Nearside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Offside Position lamp switch insecure |1.1.4b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |