Most common failures | No# failures |
---|
Registration plate issues | 75 |
Rear reflector on motorcycle missing |1.4.1| | 63 |
Headlamp aim out of alignment | 40 |
Horn not working |1.7.3a| | 25 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 21 |
Front wheel bearings have excessive free play |2.3.5b| | 20 |
Headlamp aim beam image kick up to the offside |1.6| | 14 |
Rear Rear reflector on motorcycle missing |1.4.1| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear Wheel spoke excessively loose |4.2.1b| | 9 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 9 |
Drive chain excessively loose |6.2.1d| | 8 |
Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear reflector missing (4.8.2 (a) (ii)) | 6 |
Horn missing |1.7.1| | 6 |
Drive chain worn to excess |6.2.1e| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
Front Front wheel bearings have excessive free play |2.3.5b| | 5 |
Horn not working (7.7 (a)) | 4 |
Rear Position lamp not working (4.2.1 (a)) | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Front Drive chain sprocket worn to excess |6.2.1e| | 4 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
An item not tested |Manual| | 2 |
Rear position lamp incorrect colour |1.1.2b| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Brake lever insecure |3.1.2a| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear reflector on sidecar missing |1.4.1| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Wheel spoke excessively loose x 20 (5.2.2 (d)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Exhaust has a major leak of exhaust gases manifold (6.1.2 (a)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Shock absorber insecurely attached retaining bolt missing (5.3.2 (a) (i)) | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Stop lamp missing dissconected |1.3.3a| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Exhaust mounting missing bolt missing from middle of exhaust |7.1.1c| | 1 |
Nearside Front Lower Steering lock stop maladjusted re adjusted |2.1.3| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain clip incorrectly fitted |6.2.1h| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Centre Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Headlamp aim headlamp damaged and function impaired head light incorrectly wired |1.2.3a| | 1 |
Motorcycle structure cracked |6.1.1a| | 1 |
Vehicle identification number not permanently displayed |6.3.5a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Horn emits 2 or more alternating tones |1.7.3b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Inner Front Lower Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Inner Rear Lower Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Outer Rear Lower Wheel spoke excessively loose |4.2.1b| | 1 |
Rear position lamp incorrect colour Showing white light to the rear. |1.1.2b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
All direction indicators missing switch present but indicators removed |4.4.1 |a| |ii|| | 1 |
Stop lamp light intensity significantly reduced Brake lights very dull unable to be seen by other road users |4.3.3 |a| |ii|| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
Wheel hub excessively worn Rear wheel bearing needing replaced |5.2.1 |b| |i|| | 1 |
Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear All position lamps not working (4.2.1 (a)) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Wheel spindle loose BLOCK CRACKED (5.2.1 (c) (i)) | 1 |
Centre Rear Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Exhaust has part of the system missing |7.1.1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Shock absorber has a serious fluid leak Front forks |5.3.2 |b|| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Motorcycle structure cracked Sub frame mount. |6.1.1a| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Outer Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear wheel rotation likely to be impeded hitting exhaust |6.2.1b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Brake performance not tested |3.3| | 1 |
Throttle operating incorrectly Doesn`t return |6.2.1f| | 1 |