Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 75 |
Registration plate issues | 66 |
Headlamp aim out of alignment | 48 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 30 |
Horn not working |1.7.3a| | 30 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 27 |
Rear Rear reflector on motorcycle missing |1.4.1| | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 14 |
Front wheel bearings have excessive free play |2.3.5b| | 14 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
Horn missing |1.7.1| | 7 |
Front Front wheel bearings have excessive free play |2.3.5b| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Horn not working (7.7 (a)) | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear position lamp incorrect colour |1.1.2b| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Horn missing |1.7.1| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 2 |
Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Front Wheel fractured significantly reducing the original strength |4.2.1a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Nearside Steering lock stop maladjusted |2.1.3| | 2 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front Shock absorber has a serious fluid leak seals leaking (5.3.2 (b)) | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front position lamp does not face the front |1.1.1d| | 1 |
Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake linked system has an excessively worn master cylinder pivot. |3.2.B5| | 1 |
Rear Brake linked system has an excessively worn caliper pivot. |3.2.B5| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Rear Wheel spoke excessively loose |5.2.2 |d|| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
Rear Wheel spoke excessively loose wheel |5.2.2 |d|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
An item not tested |Manual| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Fuel system component leaking Carburetor bowl leaking (6.1.3 (b) (i)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Stop lamp insecure |1.3.3b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Hydraulic brake control feels spongy too spongy to be effectice |3.1.4a| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front wheel bearings have excessive free play (2.3.5b) | 1 |
Offside Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Nearside Drive chain worn to excess (6.2.1e) | 1 |
Front Lower Front wheel bearings are excessively rough (2.3.5b) | 1 |
Front Upper Steering headbearing has excessive free play (2.2.2) | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Lower Suspension component pin or bush excessively worn SHOCK |5.3.4 |a| |i|| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure back fender (6.1.1 (b) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Wheel spoke excessively loose |4.2.1b| | 1 |
Centre Front Headlamp insecure |1.2.3b| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Clutch lever positioned so it cannot be readily operated. faulty |6.2.1g| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake control |1.3.1a| | 1 |
Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |