Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 15 |
Horn not working |1.7.3a| | 14 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 13 |
Headlamp aim out of alignment | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Registration plate issues | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Horn not working no horn fitted to bike |7.7 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Brake caliper insecure front pad pin missing a clip |1.1.16 |c| |i|| | 1 |
Rear Brake cylinder insecurely mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Horn missing |1.7.1| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Rear Wheel spoke missing |4.2.1b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Vehicle identification number not legible |6.3.5a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake rod excessively damaged |3.2.A1c| | 1 |
Rear suspension component cracked |2.4.A.1a| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Horn replaced by a bell |1.7.3b| | 1 |
Horn control defective |1.7.2a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Motorcycle structure cracked |6.1.1a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Fuel cap leaking (6.1.3 (b) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Horn not working |1.7.3a| | 1 |
Horn missing |1.7.1| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced Rear subframe |6.1.1 |b| |ii|| | 1 |
Rear Drive chain fouling another component |6.2.1d| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |