Most common failures | No# failures |
---|
Registration plate issues | 121 |
Rear reflector on motorcycle missing |1.4.1| | 107 |
Headlamp aim out of alignment | 74 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 28 |
Rear reflector missing (4.8.2 (a) (ii)) | 24 |
Horn not working |1.7.3a| | 20 |
Rear Rear reflector on motorcycle missing |1.4.1| | 15 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 13 |
Registration plate lamp issues | 11 |
Drive chain excessively loose |6.2.1d| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front wheel bearings have excessive free play |2.3.5b| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear reflector missing |4.8.2 |a| |ii|| | 8 |
Drive chain worn to excess |6.2.1e| | 8 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
Rear Position lamp not working (4.2.1 (a)) | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Drive chain excessively tight |6.2.1d| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 4 |
Drive chain fouling another component |6.2.1d| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Horn missing |1.7.1| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
All direction indicators not working (4.4.1 (a) (ii)) | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Front Horn not working |1.7.3a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Wheel spoke cracked. |4.2.1b| | 2 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Position lamp not working (4.2.1 (a)) | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear position lamp missing |1.1.1a| | 2 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Centre Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |