Most common failures | No# failures |
---|
Registration plate issues | 37 |
Rear reflector on motorcycle missing |1.4.1| | 31 |
Headlamp aim out of alignment | 18 |
Horn not working |1.7.3a| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Headlamp aim beam image kick up to the offside |1.6| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 3 |
Registration plate lamp issues | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear Rear reflector on motorcycle missing (1.4.1) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear reflector on motorcycle missing (1.4.1) | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Offside Front Direction indicator missing |1.5.1a| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Rear Direction indicator missing |1.5.1a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Indicator switch defective |1.5.4| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear suspension bearing has excessive free play (2.4.A2a(i)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Horn missing (1.7.1) | 1 |
Horn not working (1.7.3a) | 1 |
Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Fuel cap leaking Seal missing. (6.1.3 (b) (i)) | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Horn not working |1.7.3a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Nearside Direction indicator missing |1.5.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) | 1 |
Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Front Headlamp switch faulty (1.2.4) | 1 |
Rear Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |