Most common failures | No# failures |
---|
Registration plate issues | 15 |
Rear reflector on motorcycle missing |1.4.1| | 13 |
Headlamp aim out of alignment | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Horn not working |1.7.3a| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear Wheel spoke excessively loose |4.2.1b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear reflector on motorcycle missing (1.4.1) | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
An item not tested |Manual| | 2 |
Front Direction indicator missing |1.5.1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Wheel spoke missing |4.2.1b| | 2 |
Vehicle identification number not displayed (0.2 (a)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear suspension component cracked |2.4.A.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Drive chain sprocket excessively loose |6.1.7 |c| |i|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Wheel spindle locking device ineffective (5.2.1 (d)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Rear suspension bearing has excessive free play bottom shock |2.4.A2a|i|| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp aim beam image too far to the right |1.6.4| | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn missing |1.7.1| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn not loud enough to be heard by another road user (1.7.3a) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Headlamp insecure (1.2.3b) | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Sidecar front position lamp missing |1.1.1a| | 1 |
Nearside Sidecar rear position lamp missing |1.1.1a| | 1 |
Rear Wheel spoke excessively loose (4.2.1b) | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Central Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Inner Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Offside Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Central Front Horn not working |7.7 |a| |ii|| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2) | 1 |