>

MOT History from tests of petrol KTM 350s year 2014

Review the list of common KTM 350 failures below or to perform a specific mot history check on your KTM then use our popular KnowYourCar service

mot history
Pass percent:80.61%
(The average a petrol KTM 350 year 2014 passes without issue)
Based on:1,057 MOT Tests
Most common failuresNo# failures
Registration plate issues55
Rear reflector missing (4.8.2 (a) (ii))37
Rear reflector on motorcycle missing |1.4.1|18
Rear reflector missing |4.8.2 |a| |ii||17
Horn not working (7.7 (a) (ii))12
Horn not working (7.7 (a))10
Horn not working |7.7 |a| |ii||9
Rear Wheel bearing has excessive play (5.1.3 (a) (i))8
Horn not working |1.7.3a|7
Stop lamp remains on when the brakes are released7
Registration plate lamp issues7
Front Wheel bearing has excessive play (5.1.3 (a) (i))7
Rear Wheel bearing has excessive play |5.1.3 |a| |i||6
Headlamp aim out of alignment6
Rear wheel bearings have excessive free play |2.4.A.2c|6
Rear Rear reflector missing (4.8.2 (a) (ii))6
Rear Stop lamp not working |4.3.1 |a| |ii||4
Front Position lamp not working (4.2.1 (a))4
Front Stop lamp not working (4.3.1 (a) (ii))4
Headlamp not working on dipped beam (4.1.1 (a) (ii))4
Rear Position lamp not working (4.2.1 (a))4
Rear Rear reflector on motorcycle missing |1.4.1|3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Headlamp aim not tested |4.1.2 |b||3
Stop lamp not working |4.3.1 |a| |ii||3
Headlamp not working on dipped beam |4.1.1 |a| |ii||3
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Horn missing |1.7.1|2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Rear reflector missing |4.8.2 |a| |ii||2
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii||2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Front Stop lamp not working |4.3.1 |a| |ii||2
Headlamp not working on main beam |4.1.1 |a| |ii||2
Front Brake excessively binding (1.2.1 (f))2
Front Wheel bearing rough when rotated (5.1.3 (b) (i))2
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))2
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Stop lamp not working (4.3.1 (a) (ii))2
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))2
Front Stop lamp remains on when the brake is released |1.3.1e|1
Front Wheel spoke excessively loose |4.2.1b|1
Rear Wheel spoke excessively loose |4.2.1b|1
Front Wheel bearing rough when rotated |5.1.3 |b| |i||1
Front Wheel bearing has excessive play |5.1.3 |a| |i||1
Rear Brake caliper inadequately mounted |1.1.16 |c| |i||1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Horn control defective |1.7.2a|1
Front wheel bearings have excessive free play |2.3.5b|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front wheel bearings are excessively rough |2.3.5b|1
Nearside Upper Front suspension assembly component missing |2.3.1|1
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Nearside Front shock absorber seal failed and leaking oil its leaking on to the pads and tire |2.3.3|1
Headlamp aim not tested |1.6|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Drive chain horseshoe locking device likely to become detached |6.1.7 |j| |ii||1
Front Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Front Headlamp not working on main beam |4.1.1 |a| |ii||1
Front Steering operation fouling on the fuel tank or bodywork on full lock Fouling on water cooler cover. |2.1.4 |b||1
Rear Drive chain horseshoe locking device likely to become detached Horseshoe locking device worn and likely to become detached. |6.1.7 |j| |ii||1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Stop lamp not working control one |4.3.1 |a| |ii||1
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Brake performance not tested |1.2.1 |g||1
Rear Position lamp not working |4.2.1 |a||1
All position lamps not working |4.2.1 |a||1
Front Horn not working |7.7 |a| |ii||1
Drive chain excessively loose |6.1.7 |c| |i||1
Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a||1
Rear Wheel spoke missing |4.2.1b|1
Rear Rear mono-shock pivot excessively worn |2.4.B.4|1
Stop lamp remains on when the brake is released |1.3.1e|1
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i||1
Rear suspension bush has excessive free play swing arm pivot |2.4.A2a|i||1
Headlamp aim beam image kick up to the offside |1.6|1
Front shock absorber seal failed and leaking oil right hand side |2.3.3|1
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Central Rear Stop lamp does not illuminate immediately a brake applies stop lamp does not illuminate on application of front brake |1.3.1a|1
Drive chain worn to excess |6.2.1e|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Rear Drive chain sprocket worn to excess |6.2.1e|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Headlamp missing |4.1.1 |a| |ii||1
Shock absorber has a serious fluid leak fork seals both sides (5.3.2 (b))1
Rear Brake performance not tested (1.2.1 (g))1
Rear Brake master cylinder defective but brake still operating (1.1.10 (b) (i))1
Rear Rear reflector missing reflector fitted (4.8.2 (a) (ii))1
Drive chain horseshoe locking device incorrectly fitted facing wrong way (6.1.7 (j) (i))1
Rear Brake caliper has no reserve travel and braking performance affected rear brake has to much travel . (1.1.16 (e) (ii))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Brake disc contaminated (1.1.14 (b))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))1
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii))1
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii))1
Exhaust markings indicating not for road use or similar wording (6.1.2 (c))1
Front Lower Position lamp not working pilot light (4.2.1 (a))1
Horn sound not in accordance with requirements (7.7 (c))1
Rear Suspension arm pin or bush excessively worn swingarm bushes excess movement (5.3.4 (a) (i))1
Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii))1
Front Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii))1
Drive chain excessively tight (6.1.7 (k) (i))1
Rear Wheel spoke excessively loose several spokes loose (5.2.2 (d))1
Drive chain so loose it is likely to fail (6.1.7 (c) (ii))1
Drive chain worn to excess (6.1.7 (c) (i))1
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))1
Central Front Wheel bearing has excessive play (5.1.3 (a) (i))1
All direction indicators missing (4.4.1 (a) (ii))1
Central Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))1
Central Rear Shock absorber has an excessively worn bush (5.3.2 (c))1
Central Front Horn not working (7.7 (a))1
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Rear Suspension arm pin or bush excessively worn Swingarm Bearings (5.3.4 (a) (i))1
Rear brake disc in such a condition that it is seriously weakened1
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Headlamp not working on dipped beam intermitant - (4.1.1 (a) (ii))1
Headlamp not working on main beam intermitant (4.1.1 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy