Most common failures | No# failures |
---|
Registration plate issues | 29 |
Rear reflector missing (4.8.2 (a) (ii)) | 14 |
Headlamp aim out of alignment | 7 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear reflector missing |4.8.2 |a| |ii|| | 6 |
Horn not working (7.7 (a) (ii)) | 5 |
Horn not working (7.7 (a)) | 4 |
Rear Position lamp not working (4.2.1 (a)) | 4 |
Horn not working |7.7 |a| |ii|| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Horn missing |1.7.1| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 2 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies stop light not working |1.3.1a| | 1 |
Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Central Front Rear wheel bearings have excessive free play Rear Wheel Bearings Excessive Play |2.4.A.2c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp remains on when the brake is released front switch |1.3.1e| | 1 |
Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake lever has inadequate reserve travel front brake/right hand lever |3.1.3b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Suspension arm pin or bush excessively worn swinging arm (5.3.4 (a) (i)) | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Registration plate lamp issues | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Dipswitch does not operate immediately when selected on main beam stuck on main beam (4.1.3 (b)) | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not working megahorn (7.7 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Front Horn not working (7.7 (a)) | 1 |
Central Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Horn not working (7.7 (a)) | 1 |
Rear suspension bush has excessive free play swing arm bushes |2.4.A2a|i|| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Rear Wheel spoke excessively loose X5 (5.2.2 (d)) | 1 |
Front Position lamp switch does not illuminate all position lamps with a single operation (4.2.2 (a)) | 1 |