Most common failures | No# failures |
---|
Registration plate issues | 19 |
Rear reflector on motorcycle missing |1.4.1| | 18 |
Headlamp aim out of alignment | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Horn not working |1.7.3a| | 7 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 4 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Horn missing |1.7.1| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Horn not working (7.7 (a)) | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Drive chain sprocket excessively loose too tight |6.1.7 |c| |i|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
An item not tested |Manual| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear suspension bearing has excessive free play swingarm |2.4.A2a|i|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp remains on when the brake is released when back is applied |1.3.1e| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Fuel system component leaking |6.1.3 |b| |i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Front Stop lamp not working front brake light switch not working (4.3.1 (a) (ii)) | 1 |
Front Brake hose leaking flexi hose leaking at master cylinder (1.1.12 (c)) | 1 |
Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Steering lock stop maladjusted |2.1.3| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Registration plate lamp issues | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |