| Most common failures | No# failures |
|---|
| Registration plate issues | 16 |
| Rear reflector on motorcycle missing |1.4.1| | 14 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Horn not working (7.7 (a) (ii)) | 5 |
| Horn not working |1.7.3a| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Headlamp aim out of alignment | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Rear reflector on motorcycle missing (1.4.1) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Horn missing |1.7.1| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Horn not working |7.7 |a| |ii|| | 1 |
| Offside Front Stop lamp not working leaver |4.3.1 |a| |ii|| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Stop lamp missing switch missing (4.3.1 (a) (ii)) | 1 |
| Stop lamp not working rear pedal and front lever (4.3.1 (a) (ii)) | 1 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Central Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Central Rear Lower Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Central Rear Lower Suspension component likely to fail (5.3.3 (b) (ii)) | 1 |
| Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
| Drive chain excessively loose (6.2.1d) | 1 |
| Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front shock absorber seal failed and leaking oil Right hand |2.3.3| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Horn not working Wire fallen off the horn. Just needed putting back on. (7.7 (a)) | 1 |