MOT History from tests of petrol KTM 250EXCs year 2006

Review the list of common KTM 250EXC failures below or to perform a specific mot history check on your KTM then use our popular KnowYourCar service

mot history

Pass percent:74.38%

(The average a petrol KTM 250EXC year 2006 passes without issue)

Based on:160 MOT Tests

Most common failures	No# failures
Registration plate issues	9
Rear reflector on motorcycle missing \|1.4.1\|	7
Headlamp aim out of alignment	4
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Horn not working \|1.7.3a\|	4
Drive chain excessively loose \|6.2.1d\|	3
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Rear Position lamp not working (4.2.1 (a))	2
Front Front wheel bearings are excessively rough \|2.3.5b\|	2
Horn missing \|1.7.1\|	1
Rear reflector missing (4.8.2 (a) (ii))	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	1
Horn not working (7.7 (a))	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Drive chain worn to excess \|6.2.1e\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front wheel spindle securing nut\|s\| loose \|2.3.5a\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Horn not working (7.7 (a) (ii))	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Stop lamp remains on when the brakes are released	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Rear Brake disc\|s\| cracked \|3.2.A1g\|	1
Front Brake hose leaking fluid \|3.2.B4\|	1
Front Horn not working \|1.7.3a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	9
Rear reflector on motorcycle missing \|1.4.1\|	7
Headlamp aim out of alignment	4
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Horn not working \|1.7.3a\|	4
Drive chain excessively loose \|6.2.1d\|	3
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Rear Position lamp not working (4.2.1 (a))	2
Front Front wheel bearings are excessively rough \|2.3.5b\|	2
Horn missing \|1.7.1\|	1
Rear reflector missing (4.8.2 (a) (ii))	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	1
Horn not working (7.7 (a))	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Drive chain worn to excess \|6.2.1e\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front wheel spindle securing nut\|s\| loose \|2.3.5a\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Horn not working (7.7 (a) (ii))	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Stop lamp remains on when the brakes are released	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Rear Brake disc\|s\| cracked \|3.2.A1g\|	1
Front Brake hose leaking fluid \|3.2.B4\|	1
Front Horn not working \|1.7.3a\|	1

MOT History from tests of petrol KTM 250EXCs year 2006

Find us on Facebook