>

MOT History from tests of petrol KTM 250s year 2003

Review the list of common KTM 250 failures below or to perform a specific mot history check on your KTM then use our popular KnowYourCar service

mot history
Pass percent:77.10%
(The average a petrol KTM 250 year 2003 passes without issue)
Based on:869 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment31
Rear reflector on motorcycle missing |1.4.1|30
Registration plate issues30
Horn not working |1.7.3a|19
Rear wheel bearings have excessive free play |2.4.A.2c|15
Front wheel bearings have excessive free play |2.3.5b|15
Front wheel bearings are excessively rough |2.3.5b|14
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|13
Nearside Front shock absorber seal failed and leaking oil |2.3.3|9
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Offside Front shock absorber seal failed and leaking oil |2.3.3|6
Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Rear reflector missing (4.8.2 (a) (ii))6
Headlamp aim beam image kick up to the offside |1.6|5
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|5
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Rear Rear reflector on motorcycle missing |1.4.1|5
Horn missing |1.7.1|4
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Drive chain excessively loose |6.2.1d|4
Horn not working (7.7 (a) (ii))3
Rear Drive chain sprocket worn to excess |6.2.1e|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Front Drive chain sprocket worn to excess |6.2.1e|3
Rear Position lamp not working (4.2.1 (a))2
Stop lamp remains on when the brakes are released2
Exhaust is leaking and excessively noisey |7.1.1b|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Drive chain worn to excess |6.2.1e|2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Front Wheel bearing has excessive play |5.1.3 |a| |i||2
Horn not loud enough to be heard by another road user |1.7.3a|2
Offside Front Direction indicators not working |1.5.1c|2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Front Front wheel bearings have excessive free play |2.3.5b|2
Stop lamp remains on when the brake is released |1.3.1e|2
Front Wheel bearing rough when rotated |5.1.3 |b| |i||2
Rear reflector missing |4.8.2 |a| |ii||2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2
Front Horn not working |1.7.3a|2
Fuel cap sealing washer missing |7.2.2c|2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Central Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Rear suspension bearing has excessive free play |2.4.A2a|i||1
Rear suspension bush has excessive free play swingarm |2.4.A2a|i||1
Fairings so located that it is likely to impede the steering rear fender |2.1.2e|1
Stop lamp not working (4.3.1 (a) (ii))1
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Brake master cylinder fluid level dangerously low |3.2.B1d|1
Fuel system component leaking |7.2.1a|1
Exhaust excessively deteriorated |7.1.1a|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Drive chain excessively loose (6.2.1d)1
Headlamp insecure |1.2.3b|1
Horn not working (1.7.3a)1
Headlamp insecure (1.2.3b)1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)1
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)1
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)1
Stop lamp does not illuminate immediately a brake applies (1.3.1a)1
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)1
Rear reflector on motorcycle missing (1.4.1)1
Fuel cap sealing washer missing (7.2.2c)1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Rear Stop lamp missing |1.3.3a|1
Horn not working (7.7 (a))1
Drive chain worn to excess (6.1.7 (c) (i))1
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Suspension arm pin or bush excessively worn Swinging arm (5.3.4 (a) (i))1
Rear Brake caliper|s| insecure |3.2.A1j|1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Throttle operating incorrectly sticking |6.2.1f|1
Rear Rear wheel spindle securing nut locking device insecure cracked |2.4.A.2b|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Brake pedal has inadequate reserve travel |3.1.3b|1
Front Brake lever insecure |3.1.2a|1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Nearside Front Direction indicators not working |1.5.1c|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Front Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Centre Upper Horn not working |1.7.3a|1
Rear Wheel has an excessively distorted bead rim. |4.2.2|1
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Rear Brake performance not tested |3.3|1
Wheel spoke excessively loose |4.2.1b|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Front Hydraulic brake control feels spongy |3.1.4a|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Drive chain excessively loose |6.1.7 |c| |i||1
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i||1
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))1
Riders seat insecure |6.2.1a|1
Steering headbearing has excessive free play |2.2.2|1
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Stop lamp does not emit a steady light not woking |1.3.1b|1
Centre Rear reflector on motorcycle missing |1.4.1|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Indicator tell tale not functioning |1.5.2|1
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1|1
Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c|1
Drive chain excessively loose (6.1.7 (c) (i))1
Throttle operating incorrectly |6.2.1f|1
Front Brake lever pivot has excessive free play (1.1.1 (b))1
Headlamp aim headlamp damaged and function impaired |1.2.3a|1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Nearside Front Wheel excessively distorted (5.2.2 (c) (i))1
Front Horn not working (7.7 (a) (ii))1
Brake lever has inadequate reserve travel |3.1.3b|1
Fuel system component leaking Overflow excessive |7.2.1a|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Rear Position lamp not working |4.2.1 |a||1
Throttle operating incorrectly (6.2.7 (a) (i))1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Rear Stop lamp not working (4.3.1 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy