| Most common failures | No# failures |
|---|
| Registration plate issues | 25 |
| Headlamp aim out of alignment | 17 |
| Rear reflector on motorcycle missing |1.4.1| | 16 |
| Horn not working |1.7.3a| | 10 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 7 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Horn not working (7.7 (a)) | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Horn not working (7.7 (a) (ii)) | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Horn missing |1.7.1| | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Fuel pipe union leaking |7.2.1a| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Rear Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Stop lamp not working at front brake lever (4.3.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies switch missing? |1.3.1a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| An item not tested |Manual| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Front Shock absorber has negligible damping effect no fork movement (5.3.2 (b)) | 1 |
| Headlamp not working on main beam flickers (4.1.1 (a) (ii)) | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Front Footrest insecure stiff (6.2.12 (a)) | 1 |