| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 48 |
| Steering headbearing has excessive free play |2.2.2| | 25 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
| Drive chain excessively loose |6.2.1d| | 19 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 18 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 16 |
| Registration plate issues | 16 |
| Rear reflector on motorcycle missing |1.4.1| | 16 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Horn not working |1.7.3a| | 12 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 10 |
| Drive chain worn to excess |6.2.1e| | 10 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 7 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 7 |
| Headlamp insecure |1.2.3b| | 7 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Drive chain excessively tight |6.2.1d| | 6 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 5 |
| Nearside Rear Direction indicators not working |1.5.1c| | 5 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 5 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Brake hose damaged | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Offside Footrest insecure |6.2.1a| | 4 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 4 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
| Rear Wheel spoke excessively loose |4.2.1b| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Registration plate lamp issues | 3 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Front Headlamp insecure |1.2.3b| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Handlebar deformed |2.1.1b| | 3 |
| Headlamp damaged and function impaired |1.2.3a| | 2 |
| An item not tested |Manual| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Chain guard insecure |6.2.1c| | 2 |
| Nearside Steering lock stop ineffective |2.1.3| | 2 |
| Lower Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear wheel insecure |4.2.3b| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Offside Rear Footrest insecure |6.2.1a| | 2 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
| Indicator tell tale not functioning |1.5.2| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Nearside Footrest insecure |6.2.1a| | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Offside Direction indicator not working |1.5.1c| | 2 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 2 |
| Indicator switch defective |1.5.4| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Front Brake caliper|s| insecure |3.2.A1j| | 2 |
| Fuel system component insecure |7.2.1b| | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Front position lamp missing |1.1.1a| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear position lamp incorrect colour |1.1.2b| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Horn is not continous or uniform |1.7.3c| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 2 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Direction indicator not working |1.5.1c| | 2 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Offside Front Brake hose excessively kinked |3.2.B3a| | 1 |
| Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Nearside Front suspension assembly component loose |2.3.1| | 1 |
| Offside Front suspension assembly component loose |2.3.1| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Rear Suspension arm pin or bush excessively worn Swingarm (5.3.4 (a) (i)) | 1 |
| Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
| Central Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Front Exhaust mounting does not fully support the exhaust system pipe to head |7.1.1.c| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Drive belt sprocket carrier worn to excess |6.2.1e| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Brake hose excessively kinked |3.2.B3a| | 1 |
| Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Front Brake lever mounting cracked |3.1.2c| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Steering system excessively rough tight to turn, lock to lock. |2.1.1 |a|| | 1 |
| Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected |steering rack fitted| |2.3 |a| |ii|| | 1 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Offside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Nearside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Nearside Front Upper Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Upper Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Fuel cap/sealing device missing |6.1.3 |b| |i|| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Offside Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
| Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Front Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Offside Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Offside Rear Lower Brake locking device missing |3.2.A1e| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Offside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Handlebar grip insecure to handlebar Throttle grip (2.2.1 (d) (ii)) | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Rear Brake cable badly frayed |3.2.A1b| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |
| Nearside Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Horn control defective |1.7.2a| | 1 |
| Centre Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Headlamp lens missing (4.1.1 (b) (ii)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear spring incomplete |2.4.A1b|i|| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
| Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Obligatory mirror missing |8.1.1| | 1 |
| Nearside Front Stub axle has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Offside Front Lower Stub axle has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Horn not a continuous or uniform sound |1.6.2e| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Exhaust has a major leak of exhaust gases silencer area |7.1.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings top rack mount |6.1.B.2| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear suspension bush has excessive free play swing arm bush |2.4.A2a|i|| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Indicator switch faulty |1.4.A.1| | 1 |
| Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Lower Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Horn missing |1.7.1| | 1 |
| Direction indicator not working all either dim or not flashing clearly |1.5.1c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Direction indicator not working not flashing |1.5.1c| | 1 |
| Direction indicator missing All |1.5.1a| | 1 |
| Nearside Front Upper Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Upper Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear suspension has an inadequate repair of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear reflector on motorcycle insecure |1.4.2c| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Central Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |