>

MOT History from tests of petrol KIA RIOs year 2013

Review the list of common KIA RIO failures below or to perform a specific mot history check on your KIA then use our popular KnowYourCar service

mot history
Pass percent:78.65%
(The average a petrol KIA RIO year 2013 passes without issue)
Based on:53,204 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively2419
Registration plate lamp issues2000
Headlamp aim out of alignment1349
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))648
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))523
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))438
Windscreen washer not working 396
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))396
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))317
Parking brake efficiency below requirements (1.4.2 (a) (i))312
Offside Front Position lamp not working (4.2.1 (a) (ii))260
Brakes imbalanced across an axle224
Nearside Front Position lamp not working (4.2.1 (a) (ii))164
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))144
Offside Rear Service brake excessively binding (1.2.1 (f))137
Nearside Side repeater not working (4.4.1 (a) (ii))132
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))127
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))126
Brake pipe excessively corroded119
Rear brake disc in such a condition that it is seriously weakened118
Registration plate issues110
Offside Side repeater not working (4.4.1 (a) (ii))108
Nearside Rear Service brake excessively binding (1.2.1 (f))108
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))106
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))103
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))96
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))77
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||76
Front brake disc in such a condition that it is seriously weakened73
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))73
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))67
Offside Rear Position lamp not working (4.2.1 (a) (ii))65
Nearside Rear Position lamp not working (4.2.1 (a) (ii))63
Offside Rear Inner Position lamp not working (4.2.1 (a) (ii))59
Offside Side repeater not working |1.4.A.2c|56
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||55
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))54
Parking brake efficiency below requirements |1.4.2 |a| |i||53
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||52
Nearside Rear Inner Position lamp not working (4.2.1 (a) (ii))51
Nearside Side repeater not working |1.4.A.2c|51
Nearside Side repeater not working |4.4.1 |a| |ii||50
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||50
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))48
Supplementary restraint system warning lamp indicates a fault |7.1.6 |a||47
Rear brake binding47
Offside Stop lamp(s) not working (4.3.1 (a) (ii))45
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))45
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))44
Parking brake: efficiency below requirements |3.7.B.7|42
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))41
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))41
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))40
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))40
Service brake efficiency below requirements (1.2.2 (a) (i))39
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))39
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))37
Offside Side repeater not working |4.4.1 |a| |ii||37
Nearside Front Side repeater not working (4.4.1 (a) (ii))37
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))36
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))36
Offside Rear Inner Position lamp not working |4.2.1 |a||35

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy